This Bot Snipes New Solana Launches While You Sleep┃Full Guide + Setup

Hinzugefügt: 2026-05-25

[00:00:00]My hands are free. I'm not touching my computer. This copy trade is being set up automatically by the new packet tracker sniping setup bot. And these copy trade snipe setups will be happening as long as I keep the bot running. Welcome back to another video, guys. I'm really excited to announce that Packet Tracker sniping automation is finally complete and it's a Telegram bot which is extremely userfriendly.

[00:00:26]What you guys just saw in the first clip was me scanning Binance exchange for Salana between 0.5 to 20 so going out to nonfresh wallets. Before I dive into how this sniping bot works, for all the new viewers that don't know what Packet Tracker is, Packet Tracker is a bot designed to snipe devs like this. You see how this dev only made one token? I actually missed this play because I was not at my computer when the developer made the transfer. So to summarize what packet tracker does is it snipes developers fresh or non-fresh wallets.

[00:00:59]We can see the developer is here. If we open them up on soul scan go to transfer go to oldest first and we follow this transfer right here and we keep following. It doesn't matter which one we click. It will all lead to the same wallet. Click that. Follow again. And then finally we open up this wallet right here. This is what I like to call a mother wallet. This is the wallet that starts it all. If we go to filter Salana outflow and we set our parameters to 1.057 to 1.058, that's the transfer amount he makes when he launches a new coin. So all of these different transfers, if you follow the money, it will lead to the dev wallet that made a coin. This dev is not super active, but many of his coins do go and are good. So what packet tracker does is you set up a wallet scan either through standard mode or chain tracker mode. I'll explain to you what each one means in just a sec.

[00:01:52]We're going to take a look at standard mode. How we have this one set up for Binance. This is Binance exchange right here. Our values to scan are between 0.5 to 20 soul. And right now it's scanning for nonfresh wallets. You can change that to fresh or both. So what Packet Tracker does is the moment it sees a transfer being made between 0.5 to 20 soul to a fresh, nonfresh or both wallets, it will automatically put a copy trade. So you can snipe that developer's wallet. And how it does that is it interacts with a bot called Trade Wiz. And honestly guys, Trade Wiz is in my opinion the best bot when it comes to copy trade and sniping devs. If you're new to Trade Wiz and have no idea on how to use this bot. I made a full A Toz guide on how to I'm going to leave both the guide and the official link for this bot down below in my video description.

[00:02:45]So, how this works is you see how I have a copy trade named Binance. I did this on purpose to let Packet Tracker know which copy trade to duplicate. Heading over to start, we're going to start with standard. So, standard mode means it can scan any exchange or anybody's wallet.

[00:03:03]And the moment they send Salana to another fresh, nonfresh, or both wallets, it will automatically put a copy trade with my desired settings. In this case, we're going to use Binance and it only does one hop. So, it doesn't follow multiple transfers. It only follows one. Let's go ahead and reset up our Binance play. We're going to delete this and I'll show you guys. So, you want to go to add wallet. This is Binance's wallet right here. Paste that in. And we're going to do our threshold.

[00:03:31]So, the minimum to scan I'll do 0.5. And the maximum I'll do is 20. Here is where it's really important if you want it to work properly. If you want to copy the settings for this Binance copy trade, see how I'm sniping with 0.2 and my takeprofit is 100% with a stop-loss of 30. You want to name it Binance exactly how it is in my trade whiz. Click enter and then it's going to ask you fresh, nonfresh, or both. So, usually guys, developers will use fresh wallets. 95% of the time I will select fresh, but sometimes devs do reuse wallets. That's why I added the non-fresh version as well. Click fresh only. And that's it.

[00:04:09]We can see the green circle. So that means it's running. And boom, immediately it is making a copy trade for us. So while that copy trade cooks, another cool feature here is you can select which trade was bought you want your copy trades to execute on. So if you go to change bot here, we can see that mine currently is set to Loki, but you can change them to other ones. The reason I did this is because sometimes it can get very hectic here. As you can see right now, it's it's constantly making copy trades. I don't want to mess with it and sometimes I need to do stuff on my trade with. So, I will use Trade Wiz Merlin bot here. And as we can see right now, it set up a bunch of copy trades. So, we're going to go ahead and pause that. Go back to start standard and pause. The pause usually takes about 20 seconds, so it might do a couple more. Next, you can edit it by clicking on the pencil icon.

[00:04:57]You can change the name. So, if you made a new copy trade that you want to duplicate, you can simply do that here.

[00:05:03]The wallet address, if you want to change that. Minimum and maximum amount of soul can be changed, fresh, nonfresh, or both can be changed as well. Lastly, another cool feature here is if you click on this chart icon, it will generate you a CSV that you can download and it will show in your finder. If you open up that CSV, it will show you all of the transfers it just scanned. So, we can see here Binance, here's Binance wallet. These are the wallets it scanned. It shows you the Salana amount.

[00:05:29]It shows you skipped, not fresh, skip, not fresh, skip, not fresh. And it will even show you when the copy trade fired and for which wallet. So this is nice to have to see what's actually going on in the back end. So standard mode is the most simple feature where it follows any exchanges or wallets transfer one time and it puts a copy trade snipe on that wallet. I would not recommend you blindly snipe exchanges. That's how you get wrecked. But in some cases, there are plays like this that I shared in my last video, the sniping blueprint, which will be a multi-series course, teaching you guys how to find devs like this that make coins like this that move really fast. If you snipe this, let's say you got in here with Trade Wiz, you would have gotten in much sooner, but for the sake of it, let's put it there. In seconds, you could have made 300%.

[00:06:18]Here's another coin he made. This one did rug, but majority of his coins go.

[00:06:22]Here is another one. And if we zoom in just over here, this move alone, you could have made almost a 3x and this coin did go higher. Moving on, he made this coin inquil that migrated in 45 seconds. Again, if you sniped it, you would have done very well. And lastly, he made another coin called Inquil that also moved really quick. So, in some cases, there are exchange plays like this that perform well. The next mode we have is called chain tracker. This is what I mostly use, and this feature is honestly going to change your sniping.

[00:06:50]There's so many devs I find like this that send funds. Let's open up a random wallet. Follow the trail.

[00:06:57]And if you click the first one here, it'll lead you to that end. But if you click any other one, it'll lead you to the developer wallet. We're going to click that. So, what chain tracker does is it follows these transfers and then see how this wallet has a green star. He made a coin before and it will put a snipe on to this developer. If we go and take a look at this coin, I have no idea how it performed. We can see that this coin didn't really do too much. It got bundled up, went down, and went higher.

[00:07:24]But the point of chain tracker is it can follow multiple transfers between wallets. Currently, I have it set up to 10. If needed, I can increase that. Let me show you how it works. So, we know that this wallet starts it all. I refer to it as the mother wallet. This is the wallet that initiates the transfer. So, you want to copy this wallet address.

[00:07:43]Head over to packet tracker setup.

[00:07:45]Instead of standard mode, you want to click chain tracker mode. This is the mode that follows multiple transfers.

[00:07:50]Click on that. As we can see, I do currently have some setups. Click add wallet. And just like we did before, we're going to paste that wallet in. So, we know he sends 1.057 and some change out when he makes a new coin. So, how we approach this is we make it very tight so packet tracker follows the right transfer. So, we're going to do 1.057 057 for minimum and for maximum just so we don't accidentally copy the wrong transfer. We're going to do 1.058.

[00:08:20]So giving it very little breathing room.

[00:08:22]Now again we have to tell it which copy trade setup I want it to duplicate. So you see how I have chain one chain five standard one. You can name it whatever you want. I'm going to name this one chain one. I want it to copy the first copy trade I just showed you. And then now it's going to ask does the wallet have to be fresh? Does it have to be nonfresh? or do you want it to be both?

[00:08:42]I know this developer only sends to fresh wallets. So, I'm going to click fresh. And just like that, we see our strategy has been made and it's active.

[00:08:51]You can pause it and reactivate it by clicking here. So, the next time this wallet makes a transfer, chain tracker will pick up on it and it will duplicate the settings I have here and we'll be able to snipe that developer's new coin regardless if we're at our computer. We can be sleeping. We don't have to be on our computers anymore. As long as our copy trade is made and it's active.

[00:09:10]Right now, all of mine are paused. But if they were active like this, we will get into that trade. Another thing I want to mention about chain tracker, see here how I have the same wallet multiple times. For example, GLD, sometimes he sends 0.8 soul and makes a coin, and sometimes he sends 1.10 soul and makes a coin. So, I enabled a feature where you can add a wallet multiple times and make the value of soul being sent very tight so you don't follow the wrong transfer accidentally. So, if you find a wallet like this that sends different transfer amounts, you can still snipe them all.

[00:09:43]Next, I want to show you guys the back test. How the back test works is simply you want to click it. It's going to ask you for what Salana wallet address.

[00:09:51]We're going to stick to this example since we're already on it. We're going to go ahead and click right over here and copy the wallet address. Paste it.

[00:10:00]Then it's going to ask you for the transaction signature. So the signature is right over here. Make sure you copy the one you want to look at. Paste that in and it just ran the back test. So it shows you all of the wallets that it would have copied where transfers would have been going through and then the final wallet. So, if we take this wallet and we check it, we can indeed see that this is the wallet that made that coin bulls that I showed you earlier in this video. So, I added this feature for you guys to quickly check if your strategy will work. And it's also annoying for back testing, clicking through every single wallet and transfer just to find a dead. So, this back test feature speeds that up greatly for us. A couple more things I want to show you before we move on to how to set up the bot. If we go to forward/exchanges, I added in every single exchange that I know of, and it's almost all of them. For example, if you don't know what Mexi exchanges wallet addresses, simply click here, and it will show you. You can also add your own exchanges or wallets here and it will automatically save. Next, I have my strategy. So, I added this feature in where you can add a strategy.

[00:11:15]I'll do it really quick. We're going to again use this wallet here. Copy the wallet. Paste that in. It's going to ask you how much Salana does this wallet send out. We're going to do 1.057 again and maximum 1.058.

[00:11:29]And then you can even give it a short summary of what this play does. Sends 1.057 soul through multiple wallets. Most coins 2x. I actually don't know exactly if most coins 2x for this play, but just to show you guys. Click enter. And now we can see here is my strategy. So it's kind of like having your own trading diary right here in the Packet Tracker setup bot. I'm going to show you guys exactly how to set up this bot step by step. The first thing you want to do is you want to click the official link for Packet Tracker. It will be down below in my video description. I'm going to take this link, paste it into the search. We can see the bot is over here. We are going to click on to start. And now it says, "Welcome to Packabot." First thing I recommend you guys do is join the packet tracker updates channel. And the reason for this group is to let you guys know what updates are coming because believe me, I have a lot in store for this bot.

[00:12:30]And as well, when I do make updates, and I'll try not to make them too frequently, your bots will temporarily pause and you will have to re-enter your password. Moving on to here, you want to make a password. I'm going to make one real quick. And then it's going to ask you to reconfirm your password.

[00:12:47]Please remember your password. If you do forget, it's not the end of the world.

[00:12:50]You will have to message me, but try not to forget. Now, you want to visit this link over here. This is where the magic happens. You want to go ahead and get your Telegram API ID hash. Enter your phone number. And I'm going to show you guys how to get a free Helas key. The old packet tracker, eight credits like no tomorrow. I made this one way more conservative. 1 million free Helios credits should last you for the whole month. To get your API ID and API hash, you want to go to the official Telegram website, my telegram.org. Open it in a new tab. It's going to ask you to enter your phone number. And you want to make sure you enter your country area code correctly. I'm in Canada. For me, it's plus one. For you, it might be plus something else. Enter in your number.

[00:13:29]Obviously, this is not my number, but this is the format you want it in. You don't want to put any of these because it will not work exactly how I did it.

[00:13:38]Just change your country area code. And then you want to click next. It will redirect you to a page that looks like this. First thing I do want to mention and it's very important. Never ever click delete account. This will delete your actual Telegram account. So unless you want to do that, don't touch this button. Where we do want to click is API development tools. It will bring you to a page that looks like this. I made a screenshot as I can't go back in time and redo it. You want to make the app title exactly the same as this packet tracker with capital P, capital T. Make the short name scraper with a capital S.

[00:14:14]For the URL, put the mytlegram.org URL exactly how you see it here. And for platform, choose desktop. Click create application. Now, whenever you click API development tools, it will instantly show you your API ID and your API hash.

[00:14:32]You want to copy the API ID. Head over to packa setup again. Paste that in. Go over to API hash. Paste that in as well.

[00:14:43]Enter in your phone number exactly how we did earlier with the plus country code and in the right format. Now we want to go ahead and get our free Helas API key. You want to go ahead and click on dev.helas here. Signing up or signing in with a Gmail account is the easiest way. I'm going to go ahead and click that. Now, on the main dashboard page here, we can see there's a free current plan. This renews every month. You get 1 million credits per month. As we can see, I've used a little over 100,000 so far. What you want to do is click on API keys here. And for you guys, there won't be any API key made. You want to go ahead and click create new. It will be made. Copy that. Head back to our packa setup bot. Paste in the API key. And now you want to click send telegram code.

[00:15:33]This will take a few seconds. Take your code. Copy that. Head back to here.

[00:15:38]Enter the code in. Click verify.

[00:15:42]And just like that, we're all set up.

[00:15:45]Heading back to the bot, we can see that our credentials have saved and been encrypted. The reason why I created a password is to protect all of that sensitive information you just entered like your phone number, API ID, hash, and key. All of that info gets encrypted with your password that you created, so nobody has access to it, not even me.

[00:16:06]Moving down, this is a subscriptionbased bot. I set the price to $25 a month.

[00:16:12]This will give you access to all of the current and upcoming features for the bot. If you're really passionate about sniping like I am, $25 a month is a small price to pay to get your snipes automated for you 24/7. Plus, it does support the channel and I do really appreciate it. To subscribe, you simply want to click here. It's going to automatically calculate how much $25 is from Coin Gecko and it will convert it to Salana for you. So, what you want to do is you want to copy both the amount and the wallet address. You have 20 minutes until this invoice expires. I simply went to my Phantom, enter the wallet address and amount exactly the same as we see here. So, click next, send.

[00:16:54]Now that that's done, it's going to automatically confirm when the payment is detected. This usually takes about 30 seconds to a minute max.

[00:17:05]And just like that, we see payment received. Your subscription is active.

[00:17:10]And it gives you the date until it's active. Now, when I click for/start, this new account that I just made looks exactly like what I was showing you earlier on in this video, and you can instantly start using it to automate your snipes. All right, guys. That is it for this video. If you have any questions on what I covered, including the setup. Feel free to leave a comment down below. I'll also be adding a help prompt in the bot where you can directly message me if you're having any issues.

[00:17:38]As well, if you're new to my channel and you never want to miss out on what I'm up to, I do have a Cryp Announcements Telegram group where I keep you guys all in the know. Feel free to join. The link will be down below. And as always, thank you for watching. I'll see you in the next