SITE INSPECTION-09-OCTOBER-2025 CHANGANNUR PART-11, REEL-252 #dreamhomedesign #houseplanskerala

Ajouté : 2026-05-25

[00:00:00]It's 12, right? We need to check that as well. Okay, so the easiest way is to place four bars in these four corners.

[00:00:07]Then we'll check an extra has come here, an extra here, an extra here, and an extra in this one. So that means there's an extra in this. It started from there.

[00:00:15]Starting from here and coming like this, we added an extra 12 bar up to here. So then this part became correct. We need to check each beam in the same way.

[00:00:24]We've done it like this to avoid placing pillars from here in this beam. Because of this design with just two 12 bars, a footing, its pedestal, and everything would have come here. We can avoid all that because we haven't placed pillars at every junction. There are no pillars in this, this, this, or this. No, but since it's strong enough here, it's not an issue. So this junction coming this way is our 45 junction. That 45 junction, so for just two pieces of steel, we're saving a footing. And a footing means its quantity and the workers. After all, that money comes from the owner. So we're doing this to save as much as possible for the owner.

[00:01:05]Otherwise, if you put pillars everywhere as usual, like I said, it would result in a lot of volume. And not just that, even these footings we've done now are of different sizes, right? Otherwise, they'd just make them all 5 by 5 size in one go. If done in one go, you will see that 5 by 5 isn't enough in some places.

[00:01:25]I've increased it for some.

[00:01:29]>> [music]