Engine Port Saturation Point: Unlock More Horsepower

本站添加: 2026-05-18

[00:00:00]Basically, the saturation point or the point of um saturation, so the point at where the curtain area So, this area here, obviously gets bigger as the valve lifts. That's what we call the curtain area. And the saturation point is when that area becomes bigger than our minimum cross-sectional area in the port.

[00:00:25]Meaning that until we exceed our saturation point, meaning until this area becomes bigger than our minimum cross-sectional area, our high velocity area is always at the valve seat. Meaning we can compensate for a poorly designed port if we stay under our saturation point, which in most cases, as soon as we start getting more serious, we can't.

[00:00:52]But the idea or the principle is that say we have a 100,000 lift. Well, the air moving through the port now really depending where the MCA is, it's nowhere near as critical because this now is our high speed. So, everything above that is much lower. But the problem is in the transition. So, let's say it's we get to 600,000 Cleveland or something like that, 550, 600,000, the head just turns to absolute crap. And the reason why is because our dynamic MCA now goes from this point to bam, way up here. And now the high velocity is here.

[00:01:43]And now the high velocity doesn't want to make the turn anymore.

[00:01:47]And then that's why we hear separation or or or more turbulence and so on. And we start to lose that cross-sectional area, and you'll see the head nosing off on the flow bench rather than carrying uh um the CFM.

[00:02:01]And that has to do with the saturation point. So, while we're under the saturation point, you really don't know how bad the port is. As soon as you get over that saturation point, and if you do, you really start to highlight a bad minimal cross-sectional area, bad short turn, and so on. This is why some heads turn to absolute garbage at certain lifts because the instant we shift the high speed up into the port rather than having it the valve seat ring, then we really start to see how bad the port is.

[00:02:38]Um again, I might cover a little bit more of this in a later video, but uh hopefully that gives you an idea of what the saturation point is and why it's important once you start getting into big lift camshafts and you know, trying to make some decent horsepower. For the full video, check out Induction Secrets 6 on the Bain Racing YouTube channel.