The video provides a methodical breakdown of stair geometry that bridges the gap between theoretical framing and practical site execution. It is a commendable display of structural precision and resourcefulness in residential construction.
Deep Dive
Prerequisite Knowledge
- No data available.
Where to go next
- No data available.
Deep Dive
look at the stairs to go up in colaz Smith bar and dining in 2 day
Added:Good morning to all my beautiful peeps.
Welcome back. So guys, it's a blessed Wednesday morning to all of you guys.
Hope everybody doing good. Everybody doing fine. So guys, this morning, you know, I give thanks for wake me up.
That's me live for see next birthday. So this morning I'm just out here you know I'm in Portland try to deal with stairs.
So this is how it look you know me start out from yesterday. So me do just the framing. So this is one landing from ground and then this is the next landing.
You know this is the last one enter the building. So we have one more post we put at that corner.
So this is how the first part of the frame. So this landing it's 5 ft in length. So 5 ft go that way. And then I'm going to take at least 3T 6 that would be 42.
We catch the other steers coming down.
So this is it.
So as you can see me already mark out all shad and that board all the way up.
You know me mark them out 12 12 and seven rise.
So you know you don't make it too tight.
It's going to be 7 in from here to here.
12 in there to there.
You know, we don't want it too high and too small. So, you know, normally uniform them up before we start any cutings or anything. So, it's a blessed morning. Beautiful view. Sunrise coming up early.
So, this is it.
So do now now run on some board and this landing first and then me start tread out this all the way up today.
So this how me up on today. So I have to get this at least from here today.
Finish today tomorrow finish over there and you know in the coming week deal with from here go all the way down there.
So going to go there and go down. As I can see this already frame out. So just put on some covering board and then the frame go up as well.
You know how it go peep. You know me alone here just come out yet. But here in a couple minutes from now. So you know my part. So just stay tuned. Watch what I go. All right peeps. So as you can see start let the P go down and ready.
Then you know after you go down there so you're going to make a turn to that peg and then one more turn. Then the next turn line out down by that post on the ground. So put up one side mark it out next side to go up. So me go do catch a level up here. So do couple mark and then go down and cut on that one.
over this side. So just check in what you want right there. So good. So now just go back down do a one mark that one over there. So then me come back get it t up and then me can start do me sh out come all the way up. So just check in and watch what go on.
Landing then you know you step off inside.
You have the pretty roof.
You know you're not short of nothing when you come inside. Everything well done.
two stairs.
So, this is it.
So, I think do now mark out the chairs.
So, go 7 by 14. Then I use some 2x8 but you know the 2x8 is not fully yet as not up going to be seven.
So, I'm going to take seven this one and then it's going to be 40.
So 7 by 14.
So, it's going to be 7 by 14 right through that way.
All right, peeps. Because I can see me start scale them out.
7 14 14 7 14 147 7 14 147 7 14 14 7 14 14 all the way up. So peeps watch you know always do it the easier way not the harder way. So just check in. Watch what going on. Show it to your side. All right peeps. So finish all of my marks go up. So this is how it look.
All right. So this side it first one.
Everyone just watch the tip I board and all the marking just at least at eight from the head right through. So all right. So this one now I'm going to put a post right here.
So I'm just going to make a hole and put a post. So all I line up close to your headboard just watch them everyone all the way up.
Seven 14 7 14 14. So we have all of them ready and waiting.
So it's 10 piece from down there up.
Just watch all the line all the way up.
That is how me deal with mine stuff. You know me put up all two one one and then do some mark out.
So that's the landing and then this going to be inside you know not too high just ordinary.
What we plan to do today? We plan to finish the landing.
As you can see, this one already fl. So you know this car said this one out highway says only the top one and here. So what I do now deal with here. So go up and then try to figure out the top landing tomorrow.
finish up and then you know say the new we come in we do that side go down but for today tomorrow I try to deal with this half I just watch what going on to your side peeps all the way down as me say you don't want it too high. You just want something ordinary so it can come up freely and go down freely. So this is it.
And as me say from that landing you have a turn that way. So once you out here so you have the view same way.
So I just head back down there. You know still got a whole heap of work done time move and everything. So just stay tuned, watch what I go on and you know enough love to all of you guys who subscribe to my channel who doesn't subscribe as yet.
Enough love. So finish trim up the two side the ste put into my ch. So this is how it look finish cut off like by the foot you know want to cut cut the board and then we have to make some shift back and then run short.
So I got 4 in cut off by the end. But that I least this our first landing.
So you come here, you start go up all the way up.
And then you have one more landing up on the top. See?
What bring you inside?
That is holding up.
So that is the side. So we did need some 2x10 to this side. May not get any. So you know have to splice that small piece up there. So to make it up to the 10 in.
So that good there. You know what mean we just finish line up all the tread go up and then we start the rest of it. So just check in.
So, right.
So, you know, to go down, this is it.
So, you know, after you get to that landing, turn that way. Now, we just leave that and try to focus on this quarter first.
Once we get to this quarter, this is the hardest part out of it. from down there to up here is the hardest to landing. So you have to make sure everything line up to support the toe landing cuz sometime you will run short on the landing area. So you have to line it up from early out the right way.
So that is how line up and get everything done. So me now we just start screw up and do all I ting up from down there.
So what I do now need four concrete nail piece wall side check with that come back wall and then me can start cut up got more to cut up cut up and start b up come all the way up. So peeps just stay tuned what are going on down there up then come to this landing and you turn inside.
So that is it out there.
You're going all the way down. Just check in. Watch what going on. You know me started from yesterday. So today I try me best. See if me can finish this quarter and then you know say have me send me Friday morning. So you know me come back up till Monday. So it be Tuesday again out there trying to get some done. So the side can see all I mark up everything mark out already.
If it's concrete stairs, is this important?
All right pe. So you know how it go. So me just come back on my lunch break.
So I just go back now start me start fitting some of the chart putting some my tread them already put in to there and you know me do some from early peeps. So this is how it look.
So we just start boat from right there.
I'll come this way and then I just walk one one all the way up now and finish fit them in. Yeah, I take me time and I go on and see All right. So, I'm going to put in some more upright Heat.
Heat.
Yeah.
Heat.
left.
Okay.
Heat.
Heat.
go out goat.
Okay.
Okay.
All right, peeps. As I can see, sealed up on it.
I'm getting on landing finish. Heading up. Finishing slow by slow. one at a time. So I do know me pick up couple more piece of board and then cut out some more. Go up take me time and cut them out up little by little.
Looking good so far.
But me peep you know me just love how me do me work. A lot of you guys see how me do it know in no just take me little time but me say when material want material 10 11 time same one spot just check up every board and do it in our way. If you bought a 14 know me can't get three piece out 16 you can't get four piece out so tight so me so as you can see now it's 39 into in so just add some 14 ft board if you do that come up up on this landing 4T 4T with that landing You got 4 ft by 5 ft. So four feet would be from where the black is now come to step and then the five ft from the black down to where that piece of board you know you go that side turn as me say it go a good way down good way down like down to that tree if the post then the tree then the other tree you're going down to that third tree so you know it's a lot of work to get there. But for now, me try to get this finish off today. So tomorrow the latest. So this me work on today. So what I do bring up around four more piece of board see finish off from down there to up here and then you know say me get some more do this side landing. I know say me get that out. before me day landing me I go move that tree post I go right I foot height the tree dry so it easy move so me just like how me got the base level already just move this to before nail on it and then pull off the brace rack the tree couple time and it fall and then me just get the hole there so put in the post and then me know say yes that go but for I bring up this you know when you say sun hot so me try take up this first and then when it cool can deal with this side so we go you know one of the cavian lifestyle so just check in do the right thing you know me and just please like share comment subscribe to my channel don't forget to hit that notification bell so you know as soon as we drop a video you guys will notify and tell a friend to tell a friend check Kevian lifestyle you know up on it. So I hit this. You know me I go on second day on it. It look too bad.
How it look?
More originally stairs.
Right peeps. So I'll do some more mark up and make some more cuts. So 39 water.
Wait.
What?
All right. So, four more piece have to go fit in right now. So, just stay tuned. Watch what I go on.
All right, peeps. So, this is how we look.
It's coming on good.
What would happen?
This is it.
All right, peeps. So I'm getting there, you know, one step at a time. So I cut up two more piece of board and try finish off that long piece up and then you know after get that done me have the other landing up by the top to deal with. So me just get this finished and then you know me start up on the landing halfway then try get the other post in and then now me know say yes tomorrow me just try put in the rest near the rest of screw and get it out way so you know say next move is to go down the hill I just check in watch all right speed check in again all right have two more two two more threads to put in up here and after these two you know see up here so finish it's only the landing going to leave so I'm just going to cut two piece fit up here as I can see it's only the landing up here going to leave. So you know tomorrow come out and get that out the way.
You know me not play with it when we come out here.
That is how it look.
There's only two right here and call it this side. Finish the tomorrow landing finish strap up whatever I need to strap up down here.
It's a beautiful day. You know, we get a lot of sunshine.
Plus, it's still, you know, a bit windy, but it's cool. Not too hot, not too cold, just ordinary.
So, this is this for today. Don't know what me say. just go feboard now I see him right here cut off the two piece fit them and then you know put on the top part and it's good to go so I just so just take me time and I sort it out one at a time you know not rush Your name go way down at Sumal Hill.
So you know me got at least next week on it.
piece.
So it look So this is where the step started.
You know this is the hardest part, easiest part leave. So you know once we get out this you not nothing much leave to be done on it start go down it's easy. So you know me say just call it next week and me get it out. So just stay tuned watch what going on you know cut the other two piece and get that out way for today and then tomorrow coming on it brand. So stay tuned watch going on.
Okay.
There you go.
Heat. Heat.
Heat. Heat.
Heat. Heat.
Let's get All right, peeps. So, this is how the stairs turn out for today work.
This is how it turn out. So this quarter it's finished out of the way. So you know say only have from here to the chicken pen down to the other pment tree going all the way down to that big one.
So you know me have that to deal with over the coming week. But for now me get this one out way. So tomorrow now I just finish strap up some more place underneath there and then up here. So finish off with up on this part as well.
As you can see, it's ready.
Only thing they put on some 2x4 railing on the side. Come up.
Now me just use some more screw on the side. Get everywhere on the side. Screw up the right way. And know say yes we finish with this quarter. So next week it going to be our next quarter down to the printer tree go down and see side now ready to screw up.
All right, peeps. So, you know, it's my pull off time. You know, dinner time now. You know, have to try deal with something to eat for, you know, the whole day. You know me still want something night to eat same way. So you know say it's just 6:20 have to try deal with something but you know say tomorrow back out on the juggling again finish up that landing put in the post flow it off and then you know say by Friday morning supposed to leave out to St. Elizabeth, you know, say back up your Monday again and then, you know, say start some more work Tuesday. So, you know, say just from the lower landing go down where I go start from. So, you know how me leave it already. You know me get good amount done today. So, you know that yesterday is the same thing. Start the framing yesterday and things. So, you know how it go. So, just stay tuned. Watch what I going through the rest day.
So peeps just watch how we do it here.
Now you have to just start your landing get it floor off for two or three you know mark every tread go down and then you can frame it from either the higher part or the lower part. So you can frame go down or you can frame come up. some me frame come up and then finish off the landing up there. So you know say tomorrow now me just go underneath screw up your side some little strap underneath same way and then work on the landing put in the post I know say when a week start is just the other part go down we deal with now so you know how it go material I bring about four tomorrow cut them fit them on and I hit that fee tomorrow work I me say look tightening up and nickn get that done tomorrow and no say yes that is it senti and then back up here again so peeps just do the right thing by just please like share comment subscribe to my channel it's your boy Kevian lifestyle and love What?
Related Videos
BMW Built A Radial Engine So Good It Made The Spitfire Obsolete Overnight
MachineTitans999
123 views•2026-06-18
UÇAK MOTOLARI ÇALIŞMA PRENSİMİ
PistonTV
428 views•2026-06-17
The Bizarre Design Flaw That Ruined The Convair 990
Jet-Deck
631 views•2026-06-19
Why Are Rocket Nozzles Bell-Shaped? Propulsion | Aerospace engineering | GATE | Viru Sir IITian
conceptlibrary
189 views•2026-06-15
US Navy's Helios laser tech
Striketech0310
6K views•2026-06-18
NEW ENGINEERING DESIGN FOR IAM MARWA APPALOOSA FARM @iammarwa
findingian001
443 views•2026-06-17
The Air Force Built a Jet With Wings Swept the Wrong Way
TheAbsurdArchiveYT
639 views•2026-06-16
China Is Building a Machine the World Can’t Stop
TechAIVision-f6p
192 views•2026-06-15











