Copper Electroforming Organic Homemade Conductive Paint In The Copper Electrolyte Time Lapse

Added: 2026-06-03

[00:00:00]This is the time lapse of the homemade conductive paint being copper electroformed in the electrolyte solution. I will show you the results soon, but it turned out great. However, I did overpowered it and I burned out a couple small spots in the plating.

[00:00:15]Nothing too bad, but it did make the finish not look as great as it could have. I did not want to make the mistakes of not taking a time lapse and not removing the wires from the object in order to prevent them from fusing together with overplating. So what I did is increase the power to a lot more than required so I could also plate it quicker and be able to take a time lapse before my camera ran out of power. The entire process took just under 60 minutes. Not bad. If given 2 hours and less power, the plating would have been perfect. Either way, this homemade conductive paint should work pretty good for many of you. I might release it before other tests. I'll see what to do.

[00:00:56]Stay tuned for the results and the polish final result.