You Won't BELIEVE What Happens To Our SHRINKY DINK In Hot Resin! - Maker Month Ep.16

Hinzugefügt: 2026-05-23

[00:00:00]All right. Good luck, little buddy.

[00:00:10]Hello and welcome back to my workshop.

[00:00:12]On today's episode, we are going to try Shrinky Dinks inside of hot resin.

[00:00:17]Shrinky Dinks in hot resin.

[00:00:20]>> I can't wait to see if this works. Hey, >> this is going to be amazing. If it's anything like when we were kids and we would get our chip packets and we'd throw them in the oven.

[00:00:28]>> Yes. And we'd watch them shrink down.

[00:00:30]>> Yep. And then make them into keychains.

[00:00:31]>> Yeah. Keychains. You drill a little hole in the corner. And >> Exactly.

[00:00:34]>> You do the um what is it? Uh Smiths or >> or Twisties?

[00:00:39]>> Doritos.

[00:00:40]>> Sandboy.

[00:00:41]>> Sandboy. I haven't heard that for a while. Didn't they change names from memory?

[00:00:46]>> No, I think they still make them.

[00:00:47]>> They're still Sandboy.

[00:00:48]>> Yeah.

[00:00:48]>> All right. Well, today we are doing our own version using some of this Shrinky Dink plastic. Yep.

[00:00:54]>> Uh Nicole grabbed that online. probably Teemo or Sheen or something.

[00:00:58]>> I think it was Teemo. Yeah, >> something like that.

[00:00:59]>> Yep.

[00:01:00]>> Uh and we are going to see today whether or not our resin can get hot enough >> to shrink them. I've heard they need about 150°, >> which is a lot.

[00:01:10]>> It is a lot.

[00:01:10]>> And I know back in the day, a few years ago, when I was doing a lot of experiments, I'm pretty sure I got the resin to about 160.

[00:01:17]>> Ooh. So, that should be perfect.

[00:01:19]>> Cross fingers, it might actually work, right?

[00:01:22]>> Uh so, that is the plan for today. Now, I think Daran, before we actually go ahead and uh putting one straight into our resin and watching it on Pot Cam, >> we should probably do a test to make sure since this was bought online pretty cheap.

[00:01:34]>> Yes.

[00:01:35]>> Is it actually going to work? Cuz we don't want to waste half a liter of resin. Right.

[00:01:38]>> That's right. Yeah.

[00:01:39]>> If it isn't going to actually shrink.

[00:01:40]>> Yes.

[00:01:41]>> So, I think the plan for today, well, the plan straight up, I should say. I said today because I'm used to our maker episodes where we film over multiple days.

[00:01:49]>> Multiple days. Yes. The plan for right now is we're going to take our scissors and we are going to cut a square out of here.

[00:01:55]>> Yep.

[00:01:55]>> We'll do that first up.

[00:01:59]>> Just any size.

[00:02:00]>> Uh maybe a bit wider. Wider.

[00:02:01]>> Yeah, about there looks good. So, just a square that size.

[00:02:07]>> Perfect. Right. I'm going to take that off your hands, Dan.

[00:02:10]>> Okay.

[00:02:10]>> Now, what we need to do is we need to draw on it because I mean, look, we could just shrink on that if we want.

[00:02:16]Like, we could shrink that if we want, >> right? But let's draw on it.

[00:02:20]>> I feel like you need to see something shrink down, though. Not just a plain a plain sheet. You need to see an image go.

[00:02:27]>> You know what would be cool? How about we get the black pen, right?

[00:02:29]>> Yep.

[00:02:30]>> And draw like a ruler. You know, like >> you know, like the increments like that.

[00:02:34]Do you reckon you could draw a ruler on there?

[00:02:36]>> Oh, I'll do my best. Okay.

[00:02:38]>> Okay. Art class with Nicole.

[00:02:46]>> Not bad. Not bad. Maybe make your lines a bit longer. The um >> the little ones.

[00:02:52]>> The longer the longer lines. Yeah, that's it. That's more like a ruler.

[00:02:57]Actually, you know what? Put some numbers on there, too.

[00:02:59]>> Oh, okay.

[00:03:03]>> There we go. We have officially an an 11 cm ruler.

[00:03:10]>> All right. So, now that we have that, >> yes, >> we should get our heat gun >> and see if this shrinky dink will actually shrink your dink.

[00:03:19]>> We've got our heat gun plugged in. Yep.

[00:03:22]>> This one gets pretty hot, doesn't it?

[00:03:23]>> It does. Yeah.

[00:03:24]>> Now, I'm going to hold the middle because they should shrink from the outside to the middle.

[00:03:28]>> To the middle. Yeah.

[00:03:29]>> Is that right? Yep.

[00:03:30]>> That's what we're hoping. Hey. Right.

[00:03:32]>> Exactly. Yeah.

[00:03:32]>> I'm going to hold that down.

[00:03:33]>> Okay.

[00:03:34]>> You go for it, Daran.

[00:03:37]>> Is anything happening?

[00:03:39]Yeah, it's it's starting to heat up.

[00:03:41]>> Is it going to work?

[00:03:43]>> Oh, here we go. Oh, here we go.

[00:03:46]>> Is it No. Yep.

[00:03:49]>> It doesn't know if it wants to go or not.

[00:03:52]>> Oh, here we go. Oh, it's folding up on itself.

[00:03:55]>> That's okay. It'll It'll sort itself out.

[00:03:59]>> It's engulfing my stick.

[00:04:00]>> It is.

[00:04:04]>> Oh, not bad.

[00:04:07]It's starting to flatten out. It >> is.

[00:04:09]>> I might let go. There we go. So, we can get the middle.

[00:04:12]Should I try and give it a bit of a >> bit of a flatten out?

[00:04:16]>> Maybe this corner needs a bit here.

[00:04:18]There we go. Maybe the middle.

[00:04:23]>> Oh, it's getting there.

[00:04:24]>> It is getting there.

[00:04:28]>> How's that?

[00:04:29]>> Look at that.

[00:04:30]>> Is it This is going to be really hot now, isn't it?

[00:04:32]>> It will be. Yes.

[00:04:33]>> Can we move it yet? Or is it stuck?

[00:04:37]>> Oh, there you go.

[00:04:38]>> It's still a bit uh still a bit um what's the word? Dan I'm looking for soft. That's it.

[00:04:47]>> It's been a long week, guys. A long week.

[00:04:50]>> Check out my ruler.

[00:04:53]>> It shrunk.

[00:04:54]>> That is so cool.

[00:04:56]>> That Well, you know what? That worked well.

[00:04:58]>> It did.

[00:04:59]>> We got a nice little keychain keychain.

[00:05:01]So, we need to hope that the resin stays hot enough long enough.

[00:05:05]>> True. That's another thing, right?

[00:05:07]>> For it to shrink.

[00:05:08]>> Yeah, cuz that >> to keep that heat.

[00:05:10]>> That took a little while, didn't it?

[00:05:11]>> It did. Yeah.

[00:05:12]>> All right. Well, that's promising. I feel very promising.

[00:05:15]>> I feel confident now using half a liter of uh resin.

[00:05:19]>> So, what we need to do, let's cut ourselves another piece of that.

[00:05:24]>> And uh we actually need it to try and fit in there. So, hopefully we'll just Yeah, you cut it. We'll have a We'll have a trial fit. See how it goes.

[00:05:36]Okay, let's have a trial fit.

[00:05:39]Oh, yeah. Something >> perfect.

[00:05:41]>> Something like that.

[00:05:42]>> Yep.

[00:05:43]>> Okay, it is now time to draw our picture.

[00:05:48]>> Oh, okay.

[00:05:48]>> Now, do you want to draw it or do you want me to draw it?

[00:05:51]>> I think you should draw it.

[00:05:52]>> You want me to draw it? Okay. Well, we have some paint pens here. We're going to swap uh positions and I'm going to start drawing.

[00:06:01]>> All right. What do you think about Actually, I might draw it and you see if you can guess it.

[00:06:07]>> Okay.

[00:06:32]Okay. What do you think about that?

[00:06:33]>> Jeez, he's got some big feet.

[00:06:35]>> Yeah. Oh, you know what they're saying.

[00:06:37]Big feet, big brain.

[00:06:40]>> Okay.

[00:06:41]>> Right. Should I do some more?

[00:06:42]>> Yeah.

[00:06:43]>> Okay. Let's go for We'll go blue next.

[00:06:51]Can you guess what that is?

[00:06:53]>> Um, it's a cup of water.

[00:06:55]>> Cup of water. Oh, close.

[00:07:01]>> How about now?

[00:07:03]>> It's a lightsaber.

[00:07:05]>> A lightsaber.

[00:07:06]>> Yeah.

[00:07:07]>> No, it's a carrot.

[00:07:09]>> It's a >> All right, let's do some more.

[00:07:18]Can you get it?

[00:07:20]Is that a a shield and a sword?

[00:07:24]>> It is.

[00:07:25]>> Good job.

[00:07:26]>> Right. We need to add some white.

[00:07:28]>> Okay.

[00:07:33]I think I need one more addition.

[00:07:36]Actually, we need two more additions.

[00:07:38]>> Yeah.

[00:07:38]>> But after looking at that shield, I think I need to let it dry. So, let's give it a couple of minutes to dry that shield.

[00:07:45]Okay, I think we're dry enough now.

[00:07:47]So, I'm just going to draw on the shield.

[00:07:51]There we go.

[00:07:53]>> M >> M for maker.

[00:07:55]>> Very good.

[00:07:55]>> And then I got one more addition.

[00:07:59]We need to put some uh eyes on here.

[00:08:04]>> Oh, that's better. He looks like he can see now.

[00:08:06]>> And then you know what else I'm going to do?

[00:08:08]>> Yeah.

[00:08:09]>> We are going to sign. I've done one there.

[00:08:13]>> Oh, nice.

[00:08:13]>> I'm going to hand the pen off to you, Daran.

[00:08:15]>> Okay.

[00:08:17]And we are going to sign each side.

[00:08:22]There we have it. Now I'm going to let that dry and then we have to do something else. I have a rod here.

[00:08:28]Right. So as you saw the shrinky dink shrinks from outside in. Right towards the center.

[00:08:34]>> That's right.

[00:08:35]>> So once it's in our cup, we need this suspended. Right. But we can't just plop it in there cuz it's going to float.

[00:08:41]>> Exactly.

[00:08:42]>> So what we need to do is I've got this acrylic rod. We need to stick it to the backside in the middle. Yep.

[00:08:47]>> We're going to do that with some UV resin. Then I have some fiveminute epoxy over there.

[00:08:52]>> Just over there.

[00:08:53]>> And we are going to try and stick this in the side of the cup. So it may get a bit tricky.

[00:08:58]>> It may. Yes.

[00:08:59]>> But if all goes to plan, we are going to have our shrinky dink suspended in the middle off the ground with a rod on the side. And hopefully it does exactly like this inside of hot resin.

[00:09:26]So, our 5minute epoxy is now all set. We have him suspended. I think we need to name him, don't we?

[00:09:34]>> Do we? Okay. What are you going to call him?

[00:09:36]>> I don't know. Edgar.

[00:09:40]>> Uh, he's suspended. Yep.

[00:09:42]>> On all four sides. Cuz as you saw when we shrunk it with the heat gun, >> it it comes in from all the sides. So So that was the plan.

[00:09:49]>> Exactly.

[00:09:50]>> Now, you will also notice I put bugger UV resin on the uh rod there because we're hoping that the middle breaks away >> and does the final shrink.

[00:09:59]>> Goes pop.

[00:10:00]>> Yeah, that's what we're hoping for.

[00:10:02]>> Uh I guess we're going to find out.

[00:10:03]We're going to watch it all on pot cam.

[00:10:05]I've also added a bit of white paper because I figured with the black background uh our stick man being uh black like that >> like that. Yeah, >> it might get lost. Yes.

[00:10:15]>> So, I've added some white paper.

[00:10:17]Hopefully, it all stands out. You guys get a cool pot cam. Hopefully, it shrinks perfect.

[00:10:21]>> We're going to add some uh glitter. It's going to be amazing. Now, we want the full effect of the heat here. So, we are filling about 600 ms. >> Yes, >> we're going all the way to the top.

[00:10:32]>> We are. So, we've got a 400 cup and we'll do a 180 cup as well.

[00:10:35]>> Perfect. Now, the resin we are using for this one is Art Car slowet mixed at 3:1.

[00:10:41]I'm excited for this, Dan.

[00:10:43]>> I am too.

[00:10:44]>> We have had a huge make a week.

[00:10:46]>> We have had a massive week >> over on our second channel. If you haven't seen it already, go check it out. Actually, uh, yesterday's episode was amazing.

[00:10:55]>> If you guys missed it, we had a site supervisor.

[00:10:58]>> We did.

[00:10:59]>> And she did a fantastic job. Yes.

[00:11:02]>> Oh my goodness. She hung around for like 30 minutes.

[00:11:04]>> Yeah. Easily.

[00:11:06]>> Uh Daisy was her name. So if you want to go see what Daisy did for us, go check out yesterday's episode. It was quite good.

[00:11:13]>> It was amazing.

[00:11:15]>> Uh so yeah, 3 to one be going in now.

[00:11:18]>> Yep.

[00:11:22]>> What's your predictions for this one, Daran? Do >> you know what? It's so hard to call.

[00:11:27]>> Do you think Do you think we're going to get a Shrunky Dink? I think we'll get a partial.

[00:11:31]>> Oh, a partial shrink.

[00:11:33]>> Yeah.

[00:11:34]>> Okay.

[00:11:35]>> All right.

[00:11:36]>> What do you reckon?

[00:11:37]>> Well, I think we're going to get a full shrink.

[00:11:38]>> You think a full shrink?

[00:11:39]>> A full shrink, >> but I reckon he may end up with like some sort of a um a chest badge or something.

[00:11:45]>> A belly button.

[00:11:47]>> Well, well, I was going to say belly button, but where we stuck him is above his shoulders.

[00:11:51]>> Oh, okay.

[00:11:52]>> So, he's going to have, you know, a bit of a neck issue.

[00:11:56]>> Maybe if it doesn't break away.

[00:11:58]>> Yes. We're We're hoping it breaks away, right?

[00:12:00]>> Yeah.

[00:12:01]>> Just a little bit of UV on there.

[00:12:03]There's the 5minut.

[00:12:05]I was actually thinking if this shrinks perfect, we may be able to turn it into an egg.

[00:12:10]>> Ooh, >> that would look amazing.

[00:12:11]>> That would look amazing.

[00:12:12]>> It'll look really good. So, let's hope for that. Um, >> okay. So, we want it to dance.

[00:12:17]>> Yep. We're going to see it dancing.

[00:12:18]We're going to add some glitter in there. Just a smidgy of that. And, uh, then we get to pour.

[00:12:24]>> Put it into the pot. Watch it on pot cam. This one's going to be so cool.

[00:12:30]Okay, let's pop it in. Hold your breath, little buddy. I wonder if the shrinky dink will disappear.

[00:12:38]>> Yeah, true.

[00:12:39]>> That would be cool if it does. Hey, like imagine if uh he just goes clear.

[00:12:44]>> Yeah, >> that would actually look quite amazing.

[00:12:46]Let's have a look and see if it works.

[00:12:51]Oh, maybe a little bit.

[00:12:56]It's happening.

[00:13:00]Oh, we're going under.

[00:13:04]I love how he gets bigger, too.

[00:13:06]>> Yeah.

[00:13:06]>> Look at his face.

[00:13:08]Oh, that's so cool.

[00:13:10]>> So, he's going to get bigger putting the resin in. Hopefully, he's going to shrink.

[00:13:14]>> He's going to shrink, but then he's also going to look bigger as well, if that makes sense.

[00:13:17]>> Yeah.

[00:13:18]>> So, he's going to hopefully Well, he probably will look a bit bigger than that, I think.

[00:13:22]>> So, that's 400.

[00:13:23]>> Yes. We just do his hairline.

[00:13:25]>> Okay. Well, hopefully this is enough.

[00:13:27]Hey.

[00:13:27]>> Yep. If not, we can mix up a smidge more.

[00:13:31]>> Wow. This is going to be so cool if it works.

[00:13:33]>> Yeah.

[00:13:34]>> I wonder what else we could do if it actually works.

[00:13:38]>> I don't know.

[00:13:40]>> You could print some cool uh designs on there, maybe.

[00:13:42]>> Oh, definitely. Yeah.

[00:13:43]>> All right. How much do we have?

[00:13:46]Not bad.

[00:13:50]What do you think? Do you think that's enough? We're about I think that's enough.

[00:13:53]>> We're nearly an inch over his head.

[00:13:55]>> Yeah.

[00:13:56]>> All right. It's now time to pop it into the pressure pot.

[00:14:00]>> Yes.

[00:14:00]>> Let's make sure we have him facing the camera.

[00:14:03]>> Yes.

[00:14:05]>> All right. Good luck, little buddy.

[00:14:16]Okay. All that's left is to put the lid on, put some air in it, and cross our fingers.

[00:14:22]>> Yes.

[00:15:00]Heat. Hey. Hey.

[00:15:32]Okay, it is now time to take the air out of our pot. I'm hoping you guys just got to see the best pot cam ever.

[00:15:39]>> Yeah, cuz we haven't seen it yet.

[00:15:40]>> Where his big sword just shrunk.

[00:15:45]>> I'm hoping that's what you got.

[00:15:46]>> Definitely hoping.

[00:15:48]>> We are now going to pull the air out and see for ourselves.

[00:15:59]>> Now, what do you think we got, Dan? Do we have a shrunken sword? Oh, I'm I I don't know.

[00:16:05]>> I still feel like we're going to have this portion around his chest.

[00:16:08]>> I think we're going to have some shrinkage.

[00:16:11]>> Just some.

[00:16:11]>> Just some.

[00:16:12]>> Okay, here we go. Three, two, one.

[00:16:17]Oh. Oh. Okay.

[00:16:21]It It kind of worked.

[00:16:24]>> It kind Oh, he Okay, it did break away.

[00:16:27]Look at that.

[00:16:28]>> He did break away. So, that worked well.

[00:16:31]And we have got >> He's laying down on the job.

[00:16:34]>> He is laying down the little bugger.

[00:16:37]>> Oh wow.

[00:16:39]>> That's cool. That is cool.

[00:16:41]>> He's doing a Superman.

[00:16:43]>> He is.

[00:16:44]>> Look at that.

[00:16:46]>> Wow. You know what, Darren? That was a big sheet.

[00:16:50]>> It was. Good job.

[00:16:52]>> It worked.

[00:16:52]>> It did.

[00:16:53]>> The shrinky dink worked. Wow. I can't wait to watch Pot Cam back.

[00:16:57]>> Yeah, definitely.

[00:16:58]>> Oh, it broke away so good. I wonder how soon it broke away.

[00:17:02]>> Yeah.

[00:17:03]>> Wow. Can we pop that out of there? Let's have a look.

[00:17:06]>> Yeah.

[00:17:06]>> Give it a good whack. Here we go. Bit bit of a clearer look. Oh, yeah. Oh, >> that is cool.

[00:17:14]>> Look at the edges. How it's like feathered almost like fabric.

[00:17:17]>> Yeah. It's almost like um what are those? Is it a free faller where they jump off the building with those >> the wingsuit wings? Yeah.

[00:17:25]>> Yeah. The Red Bull wing suit or whatever it is. It almost looks like a magic carpet, too, with the threads hanging off it.

[00:17:32]>> Yeah.

[00:17:33]>> Oh, I'm impressed.

[00:17:34]>> I am, too. Not going to lie. If we can now, now that we know this works, right?

[00:17:39]>> Y, >> it definitely shrinks without a doubt.

[00:17:42]>> I think we just got to develop a better holding pattern, >> like a holding design, you know what I mean?

[00:17:46]>> Maybe if the rod was a bit shorter, so it was closer to the back, if it's going to break off and fall forward, it'll still fall like in the middleish.

[00:17:54]>> Yeah. I think maybe once we watch Pot Cam, we may have a better idea as to what actually happened.

[00:17:59]>> Yeah.

[00:17:59]>> But I tell you what, that's cool, man.

[00:18:02]>> Yeah, I'm impressed.

[00:18:02]>> I am really, really impressed.

[00:18:05]>> All right, guys. You need to let us know down below. Can you think of a way that we could potentially suspend our shrinky dink so that we get the perfect blank?

[00:18:13]>> Yes.

[00:18:14]>> What an amazing experiment.

[00:18:16]>> That was so cool.

[00:18:18]>> I can't wait to watch Pot Cam.

[00:18:20]>> Yep.

[00:18:20]>> It's going to look so good. Uh, if you guys enjoyed this episode, let us know by hitting the thumbs up. But please only do it if you feel this video deserves it. Do we have a question for today, Dan?

[00:18:29]>> Oo.

[00:18:30]>> What about since he was flying like Superman?

[00:18:33]>> Yeah.

[00:18:33]>> What's your favorite superhero?

[00:18:35]>> Oh, that's a cool question.

[00:18:37]>> Let us know down below. Uh, mine's probably probably Spider-Man. I love Spider-Man.

[00:18:43]>> And Batman.

[00:18:46]>> There you go. Batman and Spider-Man. Let us know yours down below. Uh, that is it for today's episode. If there if there are any experiments that you want us to try, let us know in the comments. But for now, we'll see you later.

[00:18:57]>> See you.