Eddie masterfully simplifies mechanical chaos into practical, common-sense solutions that prioritize immediate functionality. It is a sharp demonstration of how basic diagnostic logic can solve real-world problems without unnecessary over-engineering.
Deep Dive
Voraussetzung
- Keine Daten verfügbar.
Nächste Schritte
- Keine Daten verfügbar.
Deep Dive
Today at Smile More Carwash, the chaos never ends! and laundry ladies get a new drawer.Hinzugefügt:
All right, good morning.
Got here this morning. Got a couple things.
This says I got a note. Eddie stuck wash but never even got water in it.
H stuck on wash but never even got water.
Okay. So, let's pop the lid off.
Okay. Computer is 000. Okay. Stuck on wash.
H.
Oh, wait. The door's not closed.
Okay, so the drain valve is working cuz I can see water in there.
We're on final rinse.
All right. So, we're going to let this run.
Okay. So, I just dropped some coins in there and this thing's filling with water.
But I did notice that somehow the cold was pressed and the hot was pressed. or this little white tab here showed up on the cold and the hot.
So, I'm not so sure that that might have been the problem that it was that both of these were selected at the same time and it may have been in the middle, you know, in the middle state where it wasn't releasing water.
So, that's the only thing I can think cuz I had to push warm to get it to release these two. Cuz if I push cold, it showed it was already set and it didn't do anything. I push hot, it was already set. So, I had to go to warm.
Then I was able to go back and select these individually.
So, I kind of think that's what the problem was uh with this.
So, I ordered a shelf for our desk.
So, it came in. So, we're going to open it up and see um and see about getting it installed underneath the desk. The girls were just asking me about hangers and stuff to put uh to put our sheets on here cuz we've had trouble with people. Well, they'll pick these sheets up to look at them to schedule their appointment and it doesn't work out so well that way. So, we needed another, you know, there's a lot of space here under our desk and there's no shelf.
So, that's on our to-do list today before people start coming in. But this is our little drawer that I ordered.
and I just looked online.
Trash bag in there.
I just looked online and kind of read the reviews.
Kind of looked at what I thought we needed.
I think this one this one will work. So, this is our drawer.
It's pretty good size.
Give us some extra space for the pins and all that. Pretty basic.
Is it plastic?
Yeah, it's I thought it was metal. Well, I guess the front's metal.
The bottom's plastic.
All right, seems good enough.
See if we get this thing mounted under the desk.
without putting a hole through the desk.
Cuz I did uh I do have a little bit to to drill uh some pilot holes.
I don't know if I need them or not, but I might.
Sure, this is like particle board stuff, so might not be necessary, but all right. So, it's going to be a little tricky. How am I going to This thing's not too heavy. So, maybe put some stuff down here on the floor so I'm not walking around with it walk all the time.
Okay.
So, how am I going to do this? About like that.
Okay. So, how am I going to hold this?
You know what?
Maybe I wonder this is our nightmare mess cords that I don't want to mess up.
Okay, so there's a little bit of room right here. So, let's see.
Let's see how close to hold that up.
Hold this up for me so I can screw it in.
Okay. So, there is a pin here, I think.
All right. So, pull our pin out.
Maybe. There we go. Okay. So, now I should be able to set this at any height that I need to be able to mount this thing. Maybe.
Maybe. Let's try it and see what happens.
Oh, yeah. I think that'll work.
I think that'll work.
So, then we can just set it right there.
And I can just lift this up whatever height I need it.
Well, look at that.
What do you think? I think that'll work.
Huh? I think that'll work.
Okay. So, let's get a measurement here.
5 in.
So, I'm going to move over just a little bit.
Six.
and six.
Okay. So, that's the center.
All right. So, let me work on here just in case I push it off a little bit.
Now I'm just barely starting this hole a little bit cuz I don't want to put a hole through this top of the Beautiful.
Beautiful.
The same Okay.
All right. So, we got her mounted.
That's what she looks like on the sides.
All right, let's see what we got here.
See how she's going to work.
Take her little shelf out.
Yeah, I had a hard time trying to hold that.
Okay, it's crooked for some reason.
That's straight right there.
Okay, so now they won't have to hang their stuff underneath here anymore.
Put that there. They got some room for some pencils.
You don't have enough hands to do something. Just got to get creative.
That cart worked. Perfect.
Perfecto.
There's the instructions.
Guess I don't need those.
Yeah. Well, I get in trouble with my wife cuz I don't look at the directions.
Depends how complicated it is. That drawer, there's not too much going on.
All right. So, we got our drawer done.
Stuff back on my cart.
Oh, this goes back in there. Okay. All right. So, we got that little project done.
All right. I just got to the car wash.
There's something something Turn our engine pressure up.
Oh, good.
Okay.
I don't know what happened there, but that thing's hot.
Who knows how long it's been running.
Let's turn it back on.
Oh man, that be hot.
It's hot.
There's pieces everywhere here. This is apparently what blew off.
At least I can turn it off.
Let that thing shut off so I can talk to you.
Got to check the trash.
Not too much.
That's what I was ready for.
Come on.
What the Okay, now this thing stopped running.
So, let's let's see what's happening here.
So, I see this. I don't know.
Okay. So, this one back here doesn't have didn't have this air valve thing.
So, I don't know if it doesn't need it, but it blew this off, which obviously caused air compressor to run.
So, the tire cleaner is going to be out until I can get somebody out here to look at this and see.
Let me get a picture of it and I can send it to the guy that does some work for me. So, I don't know anything about this. I'm gonna fire this off to him and hopefully Monday. I don't know if he has any parts. He's going to have to order something.
I got a valve that's leaking here.
There's not going to be tire cleaner for a couple days.
Everything else seems all right.
Let's see. Let's uh probably do a little chemical sting here.
I'd really like to get into this bucket.
Tell you what, that looks like about a gallon.
Like to get out of that bucket. So, I've been using that forever.
All right.
Okay. So, I seen this thing leaking just a little bit.
plug for that. Otherwise, I might put that bait out of service.
I don't know. I got some stuff in here.
just keeps getting better. At least they kicked it on while I was still here.
I don't know. Okay, so I went down and picked up a plug the hardware store.
So, and I think I don't know where else you got to turn the water off. I think that's the right size plug. Let's just see if we can take this off.
Okay. So that's like Okay. So this should fit.
Same thread.
Oh, good. Same thread.
Okay. So, let me I have any pipe dope?
Do I have any pipe dope? Pipe dope. Pipe dope. I don't think so.
Had some that I brought from home here.
I mean, I shouldn't need anything, but it's brass, so it shouldn't need anything.
Okay, see if we can get this thing tightened up and then we can get this thing back in service.
Okay.
All right. So, we got this leaky valve off.
All right, let's see if it's going to squirt out anymore. If we're going to be good. Okay, so we're Okay, so we're at bay two. Let's turn the water on.
All right, see what we got.
Still leaking some.
Okay. So, maybe I will need to put some tape on it.
Let me uh I just don't want to tighten it down too much. And let me put some tape on it.
Thought with the brass you wouldn't need it, but maybe we do.
Okay. So, right to tight.
So, I'll put some on there. I didn't think I would need it.
I have any pipe dope.
Okay, now let's try it. Let's make sure everything's Oh, I guess the threads go pretty far down in there. I was worried about, you know, that thing's not very deep, but it should be all right.
Some tape on there now, too. That'll take up some little bit of space.
All right, let's try it again.
All right, that looks better.
I don't see anything squirting out now.
Make sure I'm sure everything's good out here, but all right, water pressure is good.
All right, we're back open for business in bay 2.
I'm glad whoever pulled into that bay while I was in here cuz I wouldn't have known that thing was leaking. I mean, I knew it was dripping, but I didn't know it was squirting out.
Okay. So, let's end this.
So, we had a bad valve that was leaking.
So, I put a cap on it.
So, I put a cap on it. We stopped the leak.
And I also have a bad pressure cup, I guess. I don't know if that's the catch. Anyways, bad pressure cup. I'm going to call it. I don't know if that's the right name for it, but All right. So, ready, Eddie?
We'll cap it off. We don't have another one of these. We put a cap on it. Ready, Eddie?
Over and out. We'll see you.
Ähnliche Videos
U.S. Military Just Flexed The Most Dangerous Aircraft Ever Built The F-47
MaxAfterburnerusa
11K views•2026-05-29
Heating Staying On On The Hottest Day Of The Year
PlumbLikeTom
507 views•2026-05-29
발전 효율을 높이는 태양광 추적 시스템의 기술적 원리 #공학 #공정 #태양광 #알고리즘 #재생에너지
찐현장기술
2K views•2026-05-29
How Far Can A Tomahawk Missile Actually Travel?
WarCurious
13K views•2026-05-28
직관 및 곡관 배관 결합 고정 작업 #worker #process #fabrication #pipework #clamp
월드촌촌
2K views•2026-05-30
Wire To Wire Connection Trick | Strong And Secure Electrical Joint #shortvideo #wireworks
ElectricianTips-b1h
5K views•2026-06-02
Peterborough to Newark Northgate Driver's Eye View aboard an InterCity 225 - East Coast Main Line
TrainsTrainsTrains
822 views•2026-05-31
AI turbine design: hypersonic cooling leap #shorts #ai #hypersonic
bobbby_rn
671 views•2026-05-31











