ONLY 24 HOURS USING THE NEW INVERTER!, May 22, 2026

Added: 2026-05-24

[00:00:00]Heat.

[00:00:22]Heat.

[00:00:30]Well, hello everybody and welcome back to my what cycle world. Yeah, and I have to admit um you know I installed this yesterday and it's been a whole day now and uh I love it. All right. So, you remember yesterday I wanted to know if I had it on the proper split phase, right? So, guess what I found out?

[00:00:59]This screen is active. So, you tap on anything blue like this one, and it's telling me that on line one, I've got 120.1 volts at 1.3 amps going in, and I'm drawing 150 watts or so. Uh, it gave me all the information I wanted.

[00:01:20]Now I tap line two and it tells me the same thing. I got 120.1 volts coming in and now I'm using 8.9 amps on line two.

[00:01:32]That's because I got air conditioning running inside. And it is showing that I'm using uh 1,076 watts.

[00:01:44]Pretty cool.

[00:01:47]So just have when you're here, you just have to hit return and you go back to the main menu. Now every one of these icons tells you something. Like if I go to solar, it tells me on PV1, I've got 179 roughly 176 to 179 coming in with 4 amps. I go to PV2. I got 153, uh, 152, 153, 154 coming in. All right.

[00:02:18]So, that's pretty cool. It's got all the information right here. I go I go back.

[00:02:24]I don't even have to get my um voltmeter out. So, next we go to batteries. It tells me my batteries are at 53.1 and I'm drawing 6.9 amps right now off the batteries.

[00:02:43]So, I got to figure out why that's happening, but it's not a big deal because everything on here is basically plug plug and play. I mean, I connected it up and it did everything I wanted it to do to do. I go to number two here.

[00:03:00]gives me what my BMS charge voltage is and all that stuff.

[00:03:05]All I need to know is right here on this screen. And uh if I go DCAC, it's showing me what my solar panel temperatures input are.

[00:03:18]Really cool.

[00:03:20]So, I'm going to bind my um my batteries again uh with the app.

[00:03:28]Uh, that's something that I'm going to have to talk to my rep about fixing because if if you don't use it for a while, it drops the uh bind or the the binding of the batteries and you have to reinstall them or redo it all redo it all over again. And that means coming out here and scanning the barcodes on each battery.

[00:03:54]Kind of a pain. So, they should be able to have that stay logged in. So, I don't have to do that. Now, you notice there's no charge coming in. And that's because I'm pretty much at 99%.

[00:04:10]There's no charge needed on the batteries at 90 97 to 99%.

[00:04:16]And that's with uh running two air conditioners and three ceiling fans in the cabin. So, I'm in good shape. Pretty interesting stuff. Now you notice this one there's nothing on it because I'm not connected to grid. This is a hybrid unit. So it can connect to grid but I don't need to. I don't have grid grid lock. Anyway, Watt Cycle has done it again. Great item.

[00:04:50]So I'm loving rack batteries most of all. I love their rack batteries.

[00:04:55]and uh I had to add that on to three um golf cart batteries, but it's working.

[00:05:03]And this is the one that's in charge.

[00:05:06]Now, another thing that I did was I went to uh settings, battery, and everything on here is correct. Now I go to page two and then I got to change some of these settings.

[00:05:28]Mains power to battery. There's that's if the uh generator is started, but um I think 576 should be on my recharging voltage, not 53.

[00:05:40]So I might have to to up that a little bit. I'm doing some re research on it.

[00:05:46]So we'll see. But uh uh 30 seconds off discharge delay time, overcharge recovery at 51.2 volts, uh time charging and that stuff I don't use. So anyway, um, BMS now I've got the 485 BMS logged in and pylon was the protocol that I found for the BMS.

[00:06:23]And I found that by asking Google. I said, "Hey, Google, what's uh what cycles um battery protocol for their rack batteries?" And it said pylon. Cool. So, I got that set up and uh just perfect. So, I can go to second page here. Gives me state of charge and that stuff charging off at 100%.

[00:06:55]uh return and I'm back on the main menu.

[00:06:58]Go to main and I'm back on the regular screen. And it blinks by itself after a few minutes. So I don't have to worry about it blanking.

[00:07:08]I really like this. This is pretty cool.

[00:07:11]And now my my battery and the charger are talking to each other through this cable right here.

[00:07:23]And what I had to do was I had to come on here and go to set and it's on can set with the py which is for pylon.

[00:07:38]So that's the the one I want to use.

[00:07:41]BMS. I'm all set.

[00:07:45]Of course, the flies are going to bother me now cuz I'm out here. My hands are busy, of course. So, they're going to land wherever they can because they know I can't use a hand to slap them. But anyway, when you're done, up in the corner here, there's a little return arrow that puts you back on the main screen. Hit pack and it tells you what your information is for your battery.

[00:08:07]Cool. I like it. I like it a lot.

[00:08:13]So anyway, I will be selling that unit and I will be selling those four 12.8 volt 230 amp hour batteries and they're all fully charged. So I can't mail them uh any place that has to go on an airplane. They have to be truck shipped.

[00:08:34]So, I'll be coming up with a price for those and that and I'll be selling that stuff off.

[00:08:43]And uh the manual on this one, believe it or not, I've got all the all the settings for a 48 volt system already marked in on the pages of the book. And this right here, you only have to turn that on when if you're going to charge with a generator.

[00:09:00]that that's the AC input breaker.

[00:09:05]So, if you're going to run charge with your generator, if you don't turn that switch on, the generator will not do anything.

[00:09:11]That's about it.

[00:09:13]So, I'm going to go inside and cool down because I got the air conditioning on in there and it's a hot one. It's a like 100° out. So, coolness all the way around. watt cycle.

[00:09:31]Two thumbs ups, but I can't give you two because I'm holding the phone with the other one. This is G Bear reminding you, don't forget to hit that thumbs up.

[00:09:40]Don't forget to share and subscribe. And I'm signing off.