5 Denture designing in RPD

[00:00:02]this last video will help you in denture design when we're talking about denture design there is a several principles that need to be followed so what is actually the principle of denture design in the principle of denture design let's talk about number one extension of base so we must anticipate and accommodate the movement of the prosthesis the second one is major connector magic connector must reject to have across our stabilizations the third one is which is directed occurs the force along the long axis of the abutment teeth the fourth will be kite plane guidelines are created to enhance stability and and retention is supposedly winning the physiological tolerance of the parental ligament and the last one is support we need to create a maximum support is gained from the adjacent soft tissue denture bearing surface so moving on to the step-by-step of designing in a partial denture first you need to identify the said area then identify the spot for example rest or denture bearing area the third one is retention which is class and the fourth one bracing and reciprocations the fifth connectors which is manager connector or mining connector and lastly will be indirect retention so basically when we're talking about cellular area which is in pain the first thing we need to do is identify test which is color coded in yellow which is the color-coded yellow is actually the teeth need to be replaced and outline extension of cellular area in pink posterior extension should cover both maxillary tubercity and extend into the hormonal notch but it do not exit beyond the vibrating line moving on to the next slide which is support is drawn in red so for this support mark the rest 6 right example on this case basically singular of 1 3 1 2 1 one two three and measle of two five for mukosa support this can be derived from the pellet and residual rich bracing and reciprocation need to be color coded marked with glue and guide plane as inside as you can see this circle is marked with the black lined and connector which is minor connector connect all denture component to the major connector and just let this or a mesh works for the shaded area and locate the factorial line by connecting the most posterior rise on each side which is then draw a black line the ideal indirect retainer is located perpendicular to this line and should be as far as possible from the factory line and as you see this the finishing design for these cases come and look at the example of several designs and permeate the principle behind it at the end of our last design this is our references and thank you