ヘリテージデザインのプランターDIY｜庭の景色をつくる、上質なプランターベッド

Ajouté : 2026-05-23

[00:00:23]Thanks to the small greenhouse I built in April, all eight varieties of tomato seedlings are doing well.

[00:00:35]Growing from seed is difficult, but it offers unique experiences and enjoyment.

[00:00:54]This year, we should be able to enjoy many rare varieties of tomatoes...hopefully.

[00:01:10]The small greenhouse was better than I expected.

[00:01:14]Not only is it functional, but I also love the "texture of the wood" and how well it blends into the garden, so next I'll make planters in the same style.

[00:01:50]This time I made a proper design plan.

[00:02:00]I was worried because it seemed like I would need a lot of wood, and I couldn't do it all in my head.

[00:02:22]I kept the cutting at the home center to a minimum. I had them cut it to a length that would fit in the car, and then I did the rest myself.

[00:02:30]After all, the size can vary by a millimeter, and I wanted to cut as much as possible myself to make adjustments easier.

[00:02:46]So I carefully marked and calculated which parts to cut from which pieces of wood.

[00:04:43]May.

[00:04:47]I had requested renovations to the exterior walls and pillars, so I stopped making planters for the time being.

[00:04:58]We painted the pillars and exterior walls ourselves when we moved in, so I wanted to do it myself again this time if possible, and the contractor asked us, "Would you like to do the painting yourself?"

[00:05:18]I can't paint as nicely as a professional, but I wanted to try what I could do myself.

[00:05:55]The long weekend is over, and I've resumed making planters. They're about 80cm wide, 40cm deep, and 70cm tall including the legs.

[00:06:24]Since wet soil will go inside, I'm concerned about the strength of the planters. They 'll probably be quite heavy, and there will be a fair amount of soil pressure.

[00:06:46]I don't have any expert knowledge, but I'm making them while thinking about where the load will be concentrated. Also, I don't want the screws to be noticeable, and driving screws vertically from the top would cause rot, so that's a no-go.

[00:07:14]Thinking about all that, I sometimes make slight changes to the original design while I'm making them.