HOC Gage Shock Error

[00:00:01]And here is a different uh like uh digital R&R height gauge.

[00:00:08]I started out at zero.

[00:00:11]And now I've got positive 400 at the home position.

[00:00:17]And that happened because I was snapping it. Okay, let's do it again.

[00:00:27]Okay, looks pretty good.

[00:00:29]There.

[00:00:31]But if I snap it, now I'm at positive almost 200.

[00:00:40]Now, I don't recommend snapping these, but this this that's going to happen in the field. People are going to snap them.

[00:00:48]It's at this in the same position, but it's reading positive 200.

[00:00:53]And it mm jumps around in increments of about 0.100.

[00:01:00]Now, it's 300.

[00:01:05]400.

[00:01:08]500.

[00:01:11]600.

[00:01:14]800.

[00:01:19]Almost an inch, and it's in the same position.

[00:01:25]Again, I do not recommend snapping it, but when I calibrate these, I snap them because that's going to happen in the field.

[00:01:34]And I'm simulating real world um conditions to when I test them and calibrate them.

[00:01:55]So, I'm going to condemn this gauge.

[00:02:04]This is the third R&R gauge that I've condemned in 2 days.