Manual Rocker Arm Punching Machine-4.Guide Support 2 in SolidWorks

Añadido: 2026-04-29

[00:00:02]Let's take the next part of punching machine. See guide support one. We have uh uh one front view, then side view, there is one section view, then this is bottom view. Then there is a guide support two.

[00:00:17]Also guide support two is nothing but the upper part of guide support one. See the upper part is same. So we will create first guide one. Then we will save extend those and uh create guide support one.

[00:00:35]Let's see depth 70. Now see these uh depth 20 7 mm this diameter 46 and if you see side view the length is 50 mm.

[00:00:50]Okay.

[00:00:53]Then on top. Okay, this is the bottom view. Let's see this one. See there is a four holes. 30 10 56 7 and seven diameter hole. Four holes. So we will create this four hole front plane sketch.

[00:01:12]Let me choose here three point center rectangle. First point center then second point you will see here midpoint then third point. So first point center then let's say midpoint then this is third point see okay now make this line horizontal now select both line vertical equal okay now let me draw a circle okay activate line.

[00:01:59]Okay. Now I'm going to choose here mirror entity. Now select these three lines. Mirror about. Select this line.

[00:02:09]Okay. Now let me choose here trim entity.

[00:02:15]See press and hold left mouse and drag and see. This is going to trim. Now we have a shape.

[00:02:24]Now let me select this one.

[00:02:27]20 outside to outside 70 mm.

[00:02:36]depth 7 mm and this diameter uh radius uh diameter going to be let's say how much this one 46ide by two look now do one thing select these two upper edges construction line now here we have this close profile Apply extruded boss base here. Keep end condition mid plane. And here apply depth 50 mm. You will see the preview. Okay.

[00:03:19]Now I'm going to apply material so that looks better.

[00:03:24]Carbon steel.

[00:03:44]Okay, this is the color.

[00:03:48]Select off face sketch. Let me draw here vertical and horizontal construction line. This is vertical. Then this is horizontal.

[00:03:59]Let me draw here circle.

[00:04:04]Now select circle and this horizontal line and apply mirror entity. See this is mirror. Again apply mirror entities entities to mirror. Select one side these two circle and construction line.

[00:04:18]Make sure you selected copy vertical mirror about. Select this vertical line.

[00:04:22]You will see the preview. Okay. Let's define this.

[00:04:30]7 mm from one corner diameter 7 and center distance 30 look this is fully defined sketch simply apply extruded cut feature and here I'm going to apply next so this is going to cut only up to thickness of this body if If you even if you change this uh thickness it will cut total.

[00:05:03]See now this is guide four. So let me save this one guide support two. Okay.