Why German Mechanics Were Stunned US Engine Blocks Simply Dropped In

追加: 2026-05-25

[00:00:00]On the 8th of November 1942, at 1 minute past midnight, the first keel plate of a new Liberty ship was laid down at Kaiser Permanente Metals shipyard number two in Richmond, California. 4 days, 15 hours, and 29 minutes later, the finished hull slid down the ways into San Francisco Bay. They christened her the SS Robert E. Perryi. A week after the keel was laid, she was delivered to the merchant marine, fully fitted out. On the 22nd of November, she sailed out of Richmond for combat duty. She was the 47th Liberty ship built at that yard. Her construction time was a fraction of the industry average. She was built almost entirely by welding instead of riveting from pre-fabricated steel sections built at inland factories and railed in. The press called it a stunt. Henry Kaiser called it an incentive ship. The German engineers who read about her in wire reports filed in Hamburg, in Bremen, and in Danzig called it something else. They called it a method they would have to copy. 2 and 1/2 years later, on the evening of the 30th of April, 1945.

[00:01:08]The afternoon, Hitler shot himself in the bunker in Berlin, a German submarine slipped her lines at Bergen, Norway. Her name was U2511.

[00:01:18]She was a type 21 Uboat, the most advanced submarine ever built. Germany had commissioned 119 of them. She was the only one that ever sailed an operational war patrol. 4 days later, with the war ending, she returned to Bergen without firing a single torpedo.

[00:01:36]The other 118 Type21s sat at their docks. They were not seaorthy. The hull sections that the German shipyards had tried to copy from Kaiser's method had not fit together when they arrived for final assembly. The weld defects were lethal. The boats could not be sent to sea. This is the story of why an American engine built in Detroit could be uncrated in a Normandy field in the summer of 1944 and dropped into the engine bay of any Sherman tank in about 4 hours. And it is the story of why German mechanics trying to do the same thing with a Panther tank built in their own country spent their days handfitting parts that should have been interchangeable. In the end, the war was not won by the better tank. It was won by the better part number. You are watching WW2 tales. To understand what stunned German mechanics in 1944, you have to go back almost a century and a half. In 1798, a Connecticut inventor named Eli Whitney signed a contract with the United States War Department to deliver 10,000 musketss. He promised the parts of those musketss would be interchangeable. A lock from one weapon would fit into any other weapon without filing or hand fitting. In January of 1801, he gave a famous demonstration in front of President John Adams and Vice President Thomas Jefferson. He laid out the parts of 10 musketss on a table. He had Jefferson assemble a working firearm from pieces picked at random. It worked.

[00:03:04]It was also a fraud. The historian Merritt Rose Smith in his book Harper's Ferry Armory and the New Technology proved that Whitney had pre-seelected those parts. He had handfitted them in his Connecticut workshop and labeled them for the demonstration. Smith concluded that Whitney purposely duped government authorities. The real breakthrough came somewhere else and it came slowly. It came at the federal armories of Springfield, Massachusetts, and Harper's Ferry, Virginia. At Harper's Ferry, a gunsmith named John H.

[00:03:37]Hall, working under contract to the Ordinance Department, spent 20 years developing manufacturing methods that produced parts to such tight tolerances that the parts actually were interchangeable. The historian David Houndshell in his book from the American system to mass production calls Hall's 1819 breach loading rifle the first product ever made in large numbers whose components could be freely exchanged with one another and still function. It had taken 20 years to reach that point.

[00:04:07]20 years of jigs and fixtures, customuilt milling machines, and hardened steel gauges that an inspector could clamp onto a finished part to judge it in a single second. 20 years of rejecting parts that did not pass and dropping suppliers that delivered too many rejects. By the time the British held their Great Crystal Palace exhibition in London in 1851, American gun makers were exhibiting revolvers from Samuel Colt of Hartford and rifles from Robbins and Lawrence of Windsor, Vermont. The British were stunned. They coined a phrase for what they were looking at. They called it the American system of manufacturers.

[00:04:44]Britain formed a committee, sent it across the Atlantic to Springfield in 1853, and placed orders for American machine tools to re-equip its own Royal Small Arms factory at Enfield. The technology that had begun in Connecticut and matured in West Virginia crossed back to Europe, but Europe never fully adopted it. European industry and German industry above all kept its old culture.

[00:05:09]It kept what the Germans called the fatterbiter, the skilled craftsman, at the heart of every workshop. A part on a German lathe in 1905 was finished by a man with a micrometer and a file. He took pride in making it fit. The American part was finished by a gauge.

[00:05:26]When the Second World War began, that difference would decide the war. In May of 1940, German tanks rolled into France. Within 6 weeks, the French army had surrendered and the British were evacuating from Dunkirk. President Franklin Roosevelt sat in the Oval Office and asked one question. Who in this country could actually build the weapons America was going to need? The financier Bernard Baroo gave him the answer in three words. First, Bill Kudson. Second, Bill Kudson. Third, Bill Kudson. William Canudson was a Danish immigrant who had arrived in New York Harbor in 1900 at the age of 20. He had risen through the Ford Motor Company under Henry Ford himself, organizing the assembly lines at Highland Park that produced the Model T. He had moved to General Motors and become its president by 1937.

[00:06:20]He understood industrial production at a depth almost no other man alive understood it. Roosevelt offered him the job of running American war production.

[00:06:29]Kudson accepted. He gave up a salary north of $300,000 a year as president of General Motors and accepted a federal salary of $1. Kudson had a manufacturing creed. He stated it constantly. Speed produces nothing in manufacturing. He said accuracy is the only straight line to greater production. At the plants he had run, he was famous for confiscating hammers and files. If a part did not pass the gauge, it was thrown out.

[00:06:59]It was not adjusted, not tapped, not filed to fit. It was discarded and the supplier was put on notice. Starting in 1940, Kudson pushed that principle into every contract, every plant, and every supplier in the United States that wanted to build weapons. He needed tanks. The United States Army in 1940 had fewer than 400 tanks, almost all of them obsolete. He went looking for someone who could build modern medium tanks in volume. He went to KT Keller, the president of Chrysler. Keller agreed. Kudson called Albert Kahn, the architect who had designed the Ford Rouge complex and the Highland Park plant. Kahn drew up plans for a tank factory on 113 acres of farmland in Warren Township, Michigan, just outside Detroit. Ground was broken in September of 1940. The first M3 Lee tank rolled off the assembly line on the 24th of April, 1941. The roof was not yet finished. They called it the Detroit Tank Arsenal. It was five city blocks long and two city blocks wide. It held 1,000 machine tools and 8,000 specialized jigs. In December of 1942, it produced 97 Sherman tanks in a single month. By the end of the war, Chrysler had built $25,059 tanks at that one facility and had refunded approximately $50 million to the United States Treasury for coming in under cost. Across the country, 10 other factories joined Chrysler in building Shermans. The Fisher Tank Arsenal in Gro Blanc, Michigan, run by General Motors, built 11,358.

[00:08:42]Pressed steel car in Illinois, built 8,147.

[00:08:46]Pullman Standard in Pennsylvania built 3,426.

[00:08:51]American Locomotive in Skenctity, New York. Ford Motor Company at Highland Park. Lemur locomotive works in Ohio.

[00:08:59]Baldwin locomotive in Philadelphia.

[00:09:02]Pacific Car and Foundry in Belleview, Washington. Federal Machine and Welder in Warren, Ohio. Montreal locomotive works in Canada. 11 plants. between them. By the time the war ended, they had produced almost 50,000 Sherman medium tanks. The exact figure from RP Hunut's standard reference, the book titled Simply Sherman, is 49,234.

[00:09:27]Here is the part that mattered. A tank built at the Detroit Tank Arsenal in Warren, Michigan. And a tank built at Pacific Car and Foundry in Belleview, Washington, 3,000 mi away on the other side of the continent, used parts that interchanged, bolt patterns matched, mounting brackets fit, shaft splines aligned, the transmission unbolted and slid out as a single unit. The engine bay accepted any of four entirely different power plants designed and built by four entirely different manufacturers. Inside the Sherman family, four engines, four companies, all fitting the same hull. That had never been done before. The first engine was the Continental R975, a 9-cylinder air cooled radial that had started life in 1928 as an aircraft engine, the right J6 whirlwind. It produced 400 horsepower at 2400 revolutions per minute. Continental Motors built over 53,000 of them for armored vehicles at its East Jefferson Avenue plant in Detroit and at its plant in Muskegan, Michigan, roughly seven times as many for tanks as Wright had ever built for airplanes. The Sherman installation added a power shaft driven cooling fan and shroud to replace the air flow that a propeller would normally have provided on an airplane. The engine went into the M4 and the M4A1 Sherman variants. The second engine was the General Motors 6046 Twin Diesel. This was a pair of Detroit Diesel 6-71 inline six-cylinder two-stroke diesel engines yolked to a common output shaft, each keeping its own crankshaft so that either could run independently if the other failed. Total displacement was 850 cub in. Output was 410 gross horsepower.

[00:11:15]Total weight just over 5,000 lb. It went into the M4A 2 Sherman. Almost 11,000 of those were built. The Marine Corps preferred them because diesel fuel did not burn as readily as gasoline when a tank was hit. The Red Army received almost 5,000 of them through lend lease.

[00:11:34]A Soviet afteraction report from the fifth guard's tank brigade dated the 23rd of October 1943 stated that compared to the T34, the M4 A2 was easier to control and more durable in long marches because the engines did not require frequent adjustments. The tanks, the report said, performed well in combat. The third engine is the one that more than any other showed what American industry could actually do. The Chrysler A57 Multibank. In 1942, the Army needed more tank engines than Continental or General Motors could build. Chrysler was asked to design one in a hurry. There was no time to draw up a power plant from scratch. So, two Chrysler engineers, Harry Wilson and Mel Carpentia, took five Chrysler car engines, ordinary 250.6 6 cubic in inline six-cylinder Lhead engines off the Plymouth assembly line and clustered them around a central crank case. The five engines drove a single common output shaft through helical gears. Total displacement 1253 cub in total cylinder count 30 carburetors five distributors five water pumps 1. Total horsepower 425.

[00:12:53]Five car engines bolted to a single shaft. The most surprising thing about it is that it worked beautifully. The A57 Multibank turned out to be the most reliable tank engine of the entire Sherman family. Abedine proving ground data from 1944 showed that crews running the multibank Sherman spent just 45 hours on engine maintenance during the test period. The figures for the other engines were 110 hours for the M4 A3 with the Ford engine, 132 for the M4A1 with the Continental, and 143 for the M4 A2 with the twin diesel. British crews running the multibank reported a mean distance between major overhauls of 4,000 km. Chrysler built 9,965 of these engines between April 1942 and September 1943. Almost all of them went to the British, who used the multi-bank Sherman as the basis for the Sherman Firefly, the only Allied tank in the West with a gun powerful enough to reliably penetrate the front armor of a German Tiger or Panther. The fourth engine was the Ford GAAA V8 and its origin story is one of the strangest engineering accidents of the war. In 1940, Ford had been developing a V12 aircraft engine, hoping to win a contract with the United States Army Airore. The contract never came. The Air Core was committed to the Allison V1710.

[00:14:21]So Ford had a fully designed all aluminum V12 with dual overhead cam shafts and a 60° bank angle sitting in its engineering department with nowhere to go. The Army Ordinance Department asked Ford if it could be turned into a tank engine. Ford's engineers lpped four cylinders off the castings. They kept the 60° bank, the all aluminum block, the dual overhead cam shafts, the geardriven accessories. The result was the Ford GAAA, an 18 L all aluminum V8 with dual overhead cam shafts producing 500 gross horsepower at 2600 revolutions per minute. The engineering specification, in other words, of a modern Formula 1 engine, and Ford was building it at its Lincoln plant in Detroit in 1942 for installation in tanks driven through mud and snow.

[00:15:12]Approximately 28,000 were produced. They powered the M4 A3 Sherman, including the Easy8, the Jumbo Assault Tank, and ultimately the M26 Persing Heavy Tank, four entirely different engines, three engine companies, and one tank arsenal that built them, 11 assembly plants that received them, and whichever engine was pulled, whichever Sherman variant it was bolted into, it fit. The bell housing matched the transmission input shaft.

[00:15:41]The mounting brackets matched the engine bay rails. The cooling shrouds bolted up. The bolt patterns lined up. The hoses connected. The wiring harnesses plugged in. The parts dropped right in.

[00:15:53]In the orchards and sunken farm lanes of Normandy in the summer of 1944, the United States Army applied that principle in the field. The result captured in an armored force reliability study quoted in Hunut's Sherman came from the mouth of an anonymous American tanker. He said it was an easy matter to change an engine, that it took little more than 4 hours, and that it beat all hollow the best time for the Germans.

[00:16:19]How did one army do this when the other could not? The answer was in the system of organized maintenance the United States had built before the war ever started. Army maintenance was structured around five echelons. First echelon was the tank crew themselves doing daily checks and lubrication.

[00:16:37]Second echelon was the unit mechanics doing minor repairs in the field. Third echelon was the divisional ordinance company doing medium repairs in mobile shops set up under trees. Fourth echelon was the heavy maintenance battalion at field army level doing complete engine and transmission swaps, hull welding, gun replacement. Fifth echelon was depot rebuild back in England, in Italy or all the way back at Arsenals in the United States. In Europe, the system answered to Major General Henry B. Sailor, Chief Ordinance Officer of the European Theater of Operations. Sailor in turn answered to the chief of ordinance in Washington, Major General Levven Hicks Campbell Jr. Campbell had taken over the entire Ordinance Department in June of 1942. His first general order on assuming office stated plainly that whenever a member of the ordinance department, regardless of rank, encountered red tape in conducting business, he was to throw the red tape out the window. Campbell concluded the order with the words, "Acept that please as a definite general order." Under Campbell, the Ordinance Department became a $30 billion a year industry.

[00:17:47]The cost of TNT fell from 55 cents a pound in the First World War to 6 cents a pound by the end of the Second. The cost of a Thompson submachine gun fell from $90 in 1941 to $21 in 1944.

[00:18:02]None of those numbers were achieved by working men harder. They were achieved by the relentless application of standardized parts in volume. In Normandy, Campbell's system met its first test under fire. The 526th Ordinance Heavy Maintenance Company landed on Dog Green Beach at Omaha on the 9th of June, 1944. Part of the company had been lost when LST 1006 was hit in the channel 2 days earlier. The detachment that made it ashore was commanded by Captain Francis F.

[00:18:32]Poppenberg, and within 48 hours of touching the beach, his men were working on shotup Shermans. Poppenberg later received the Bronze Star with a citation that read, "Performed a heroic task in refitting, repairing, and keeping in operation badly needed tanks." Other units leapfrogged forward right behind the combat divisions. The second medium maintenance company, the oldest ordinance company in the United States Army, with a lineage going back to Chatau Tier and the Muse Argon in 1918, opened the first forward ordinance shop near Monteborg by the 13th of June. The unit history records that they worked long after dark by flashlight in blackout tents. The third armored division's maintenance battalion landed on the 4th of July. They came ashore with their own M25 Dragon wagon tank transporters, 12tonon tractors built by Pacific Car and Foundry that could haul a knocked out Sherman from the front line back to a rear area collection point. At the collection point, the ordinance crews assessed each damaged tank. If the hull was repairable, parts were pulled from crates and the tank went back into service. If the hull was beyond repair, the salvageable parts were stripped out for use on other tanks and the rest was crushed. The maintenance battalions improvised on the spot when they had to. In the third week of July 1944, an American cavalry sergeant named Curtis G. Coulin Jr.

[00:19:58]attached to the 102nd Cavalry Reconnaissance Squadron designed a steel hedro cutter from welded German anti-tank tetrahedrrons that the Vermacht had left strewn across the Normandy beaches. The cutter was four steel prongs welded to the front of a Sherman sharpened to slice through the dense earthn banks the Germans were using as defensive positions. The 25th Ordinance Heavy Shop Battalion under Brigadier General John B. Adaris built almost 300 of those cutters in 48 hours and welded them onto three out of every five first army Shermans in one week.

[00:20:33]They did it in time for Operation Cobra, the breakout that ended the stalemate in Normandy on the 25th of July. 300 customuilt field modifications designed by a sergeant mass-produced by a heavy shop battalion in 48 hours in a combat zone. Ordinance Battalion records from the official history on Beachhead and Battlefront written by leader Mayo for the United States Army Center of Military History contain dozens of operations of this kind. Engine swaps, transmission swaps, gun barrel replacements, hull patching. The American maintenance system was not just keeping the army moving. It was a second factory operating in the field fed by an Atlantic pipeline that delivered identical parts that fit. By the autumn of 1942, the German army had a problem.

[00:21:23]They had been fighting the Soviet T34 medium tank since June of 1941. The T34 had thicker armor, a bigger gun, and wider tracks than anything the Germans had in service. The Panza 3 was outclassed. The Panza 4 was equal at best. Hitler ordered a new medium tank that would beat the T34. Two firms competed for the design contract.

[00:21:47]Machine and fabric Ogsburg Nuenberg known as man submitted one design.

[00:21:53]Daimler Benz at its Berlin Marianfelder plant submitted another. Hitler personally preferred the Daimler Benz design because it looked like a T34. The Hiswafan the German army ordinance office picked the man design instead on the 11th of May 1942 because the new rhinet turret with its long 75 mm gun would only fit on the manhole. The panther had been chosen, but there was a problem. Man alone could not build it in the numbers the Vemach wanted. The plan called for 600 panthers a month by January of 1943. So the Hiswafan licensed the design to three other plants. Daimler Benz, the firm that had lost the competition, was ordered to retool and build panthers from man's drawings. Machine and fabric Neidosaxon Hanover abbreviated M&H started Panther production in the middle of 1943.

[00:22:48]Henchel and Son at Castle built Panther chassis with turrets coming from the Wegman firm next door and being mated together on the Henchel line. Four plants licensed to build the same tank.

[00:23:00]On paper, this was reasonable. The Sherman, after all, was built at 11 plants. But the Spear Ministry had not understood what came next. The herus swaffen assigned every panther part a drawing number called the gruppen number. The historian Thomas Lentz whose book Germany's panther tank written with Hillary L. Doyle is the definitive technical study of the vehicle explains why. Jent writes that the grin nan identify the exact component parts belonging to each of the various afung of the panther. The engineering disaster sits inside that sentence. The reason every part had its own drawing number was that the same nominal part the same a drive sprocket let us say was actually several different physical parts depending on which plant had built it and at which point during production. A panther furong a drive sprocket built at man in October 1943 was not dimensionally identical to a panther furong a drive sprocket built at Daimler Benz in October 1943. They looked the same. They did the same job. But a mechanic in a recovery yard could not just pull one part and bolt the other on. The chassis number had to be checked, the drawing number verified, and the part fitted by hand, if it would fit at all. Jents and Doyle document specific variations across every Panther subasssembly. Drive sprockets differed between plants. The commander's cupellar changed from a drum welded type to a cast type at one chassis number at MAN, at a different chassis number at M&H, and at a different chassis number again at Daimler Benz. The shirten, the thin steel skirts that hung along the sides of the Panther to detonate hollow charge shells before they reached the main armor, used different mounting brackets at MAN than at M&H. The engine deck exhaust shrouds varied. The turret rotation drives varied. The hull machine gun ball mounts varied. In a 2011 interview, Thomas Jentz summarized what he had found in the German archives. He said, "Man did not care what a Tiger tank looked like. The assembly workers would assemble a vehicle with whatever was on hand and whatever was most easily accessible." He was not even talking about the Panther in that quote. He was talking about a different German tank built by the same firm. The principal ran across the whole of German armored vehicle production. The fakabbiter, the skilled craftsman, was at the center of every assembly hall. He had his caliper.

[00:25:32]He had his file. If the part did not quite fit, he made it fit. He was a professional. He was proud. He was, in a sense, the best in the world at what he did. and he was the reason an American ordinance battalion in Normandy could swap a Sherman engine in 4 hours and a German Panza division recovering a Panther in the Ardens could not. The Panther was beautiful. It was lethal.

[00:25:55]The 7.5 cm Qual K42 gun was the most accurate tank gun of the war. The frontal armor, 80 mm thick on the glacis at 55° was effectively impenetrable to almost every Allied tank gun in service in 1943. A Panther could destroy a Sherman at 2,000 yd. A Sherman firing at a Panther's front plate could rarely penetrate at any range, but the Panther had to be running for the gun to fire, and the Panther was rarely running. The engine that powered the Panther was the Maybach HL230P30.

[00:26:30]23 L of displacement, a 60° V12, water cooled gasoline with a cast iron block and cast iron cylinder heads. Nominal output 700 metric horsepower at 3,000 revolutions per minute. The engine alone weighed 1,200 kg about 2600 lb. It was built at Maybach Motorinbau in Friedrich Shaen and after April 1944 also at the auto union plant at Kemnitz. The HL230 had been designed in a hurry. It was an enlargement of the earlier HL210 which had powered the first Panthers and the Tiger 1. Engineers had enlarged the bore of the smaller engine to gain displacement, but they had kept the cylinder spacing the same. This meant the metal webs between adjacent combustion chambers were dangerously thin. Head gaskets repeatedly burned through, not at the perimeter where you would normally expect failure, but between the cylinders themselves. The result was catastrophic engine damage.

[00:27:33]That was not the only problem. The fuel lines in the engine bay leaked. The carburetors overflowed, soaking the engine compartment with raw gasoline. A spark from the magneto or a hot exhaust manifold turned the engine bay into a fireball. Panthers caught fire on their approach marches before they had ever fired a shot in combat. Soviet engineers at Kubinka, who got their hands on captured Panthers in 1943 and 1944, recorded failure modes, including burnt head gaskets, burst connecting rod bearings, broken connecting rods, cracked cylinder sleeves, and water in the exhaust manifolds. The engineers at Maybach kept trying. In September of 1943, they added copper ceiling rings to the cylinder head grooves, a fix personally suggested by Ferdinand Porsche. They reinforced the fuel pump diaphragm spring. In November of 1943, the factory locked the engine governor to 2500 revolutions per minute instead of 3,000, which dropped the rated power from 700 horsepower to about 600 and reduced the Panthers top road speed from 52 km an hour to about 45. A British interrogation of a captured Panther crewman in June of 1944 recorded that his battalion had been averaging only 450 mi between engine failures. That was not even the worst part. The worst part was the final drive. The final drive was the gearbox that took the engine power after the transmission and delivered it to the drive sprocket on either side of the tank. The Panther's final drive used a simple spurgeear. Thomas Jentz wrote in Germany's Panther tank on page 147 that the final drive was the weakest part of the Panther. He went on, "It was a risky proposition," Jent wrote, "to use a spurgeear system for transferring the drive power, especially considering that the available steel during the war did not have a particularly high stress tolerance. The cause of the failure was something Albert Spear himself admitted in his postwar memoir, Inside the Third Reich. The Panther had been designed as a 30-tonon tank. Hitler kept ordering more armor and bigger guns added during the design process. Spear wrote that in the course of a year, Hitler once again insisted on clapping so much armor on it as well as larger guns that it ultimately reached 48 tons, the original weight of the Tiger. The final drive had been engineered for a 30-tonon tank. It was now being asked to transmit power through that same single spurgeear to a 48 ton tank. Jentz documented that in March of 1944, 13 final drives were replaced in 30 Panthers in one unit. a 43% replacement rate in a single month of normal operation. After the war, French army engineers evaluated captured panthers at the army testing facility at Vincens's.

[00:30:29]Their report concluded that the truly weak spot of the Panther was its final drive, which was of two weaker design, and had an average fatigue life of only 150 km, just over 90 mi. That was the distance a Panther could be expected to drive before the gears in the final drive sheared. and the steel that should have been used to make those gears properly hardened was running out. The Watertown Arsenal Mettogical Examination of Enemy Ordinance published in February 1945 recorded the steady decline of German armor steel. Before the end of 1943, German armor sections contained 0.3 to 0.55% malibdinum, a critical alloying element that gives steel its toughness. By 1944, the same plates contained only 0.15 to 0.25%.

[00:31:19]The most recently examined sections, the report stated, contained no malibdinum at all. The German alloy supply was collapsing. The huge nicopol manganese mines in Ukraine fell to the Red Army in February of 1944.

[00:31:34]The Norwegian Canaban mine became the sole German source of malibdinum. The Petsimo nickel mines in northern Finland were lost in September of 1944 when Finland signed an armistice with the Soviet Union. The Balkans with their chromium were lost in the same autumn.

[00:31:52]Portuguese and Spanish tungsten shipments dried up in the middle of 1944 under Allied diplomatic pressure. By 1945, Panther front plates, supposedly the most invulnerable armor of any tank in the world, were spalling. When a Soviet 122mm shell hit a late war panther glacis and failed to penetrate, the plate itself often cracked from the impact and large fragments broke off the back of the armor inside the crew compartment, killing the men who were supposed to be protected. These were the conditions under which Germany was building the most sophisticated tank of the Second World War. The Panther was scheduled to make its combat debut at one of the largest battles in human history, Operation Citadel. The German summer offensive of 1943 would attack the Soviet salient at Kursk in central Russia. 200 Panthers were issued to Panza Regiment 39 known as regiment von Llau after its commander Major Minrad von Llau. The regiment was attached to Panza Brigade 10 under the elite Gross Deutsland Division in the 48th Panza Corps of the fourth Panza Army. The inspector general of the Panza troops, General Hines Gudderion, had spent weeks trying to talk Hitler out of the offensive. Gderrion believed the Panther was not ready for combat and that the entire German armored force was being thrown away for nothing. At a meeting in Munich on the 3rd of May 1943, Gudderion asked Hitler directly. "Do you believe my furer?" he said, "that anyone even knows where Kursk is?" Hitler replied that he was quite right. The furer added, "The thought of this attack makes my stomach queasy." The attack went forward anyway, two months later than originally planned. On the 5th of July, 1943, the Panthers had begun to break down before they ever reached the assembly area. Several caught fire on the road march from the railhead. On the morning of the attack, 184 Panthers were operational. Out of the 200 that had been issued. Within hours of the jump off, 18 Panthers were lost on the first day at Chokascoya.

[00:33:59]On the 7th of July, six more burned out from engine fires during the approach march. By the evening of the 6th of July, only about 40 were still operational. On the 10th of July, Gudderion made an inspection visit to Regiment Von Lauett. His report preserved in the Bundesarch at Fryberg under the file RH10/64 recorded what he found. By the evening of the 10th of July, he wrote, there were only 10 operational panthers in the front line. 25 Panthers had been lost as total write-offs. 23 were hit and burnt, and two had caught fire during the approach march. 100 Panthers were in need of repair. 56 were damaged by hits and mines, and 44 by mechanical breakdown. 60% of the mechanical breakdowns could be easily repaired and were on the way to the front. About 25 still had not been recovered by the repair service. Out of 184 operational Panthers at jumpoff, 10 were still in the line 5 days later. By the end of July, the regiment's overall operational rate had stabilized at 16%. A captured afteraction report from Panza Regiment 39, dated the 11th of July, summarized the engineering disaster in a single sentence. until reaching the first preparation area. The report stated 50% of the vehicles were inoperative, twothirds of them with engine breakdowns and one-third with the lateral transmission system. Despite the breakdowns, the gun was so lethal that even a quarter of the regiment was inflicting serious damage. The 48th Panza Corps reported destroying 559 enemy tanks through the 15th of July, of which 269 kills were claimed by Panthers. But that was the high water mark. Operation Citadel was called off by Hitler personally on the 13th of July. The Red Army began its own counteroffensive almost immediately. Of the campaign as a whole, Gudderion concluded later, "By the failure of Citadel, we had suffered a decisive defeat. From now on, the enemy was in undisputed possession of the initiative.

[00:36:07]The Panther never fully recovered from the mechanical reliability problem.

[00:36:12]Right up to the end of the war, Panther final drives kept failing at that fatigue life of 150 km. A strengthened final drive was not introduced until September of 1944, more than a year after the problem was known to German engineers because redesigning and retooling it would have shut Panther production down for months.

[00:36:33]Instead, Panthers shipped out the gates of man, Daimler Benz, M&H, and Henel with a known fatal weakness from the day they entered service to the day Allied infantry walked through those same gates. By May of 1943, the marine, the German Navy, was facing a crisis of its own. 41 Yubot had been lost in a single month in the Atlantic convoy battles.

[00:36:57]The Yubot war was effectively over.

[00:37:00]Admiral Carl Donitz, who had been commanderin-chief of the cre marine for only a few months, went to Hitler with a proposal. Germany would build a new generation of yubot so technologically advanced that they would resurrect the Atlantic campaign. The proposal was approved on the 31st of May. Naval armaments were transferred from the Marine own construction office to Albert Spear's armaments ministry. The new design was called the type 21. It had a streamlined hull form derived from earlier high-speed submarine experiments. It carried six times the battery capacity of any previous yubot, giving it underwater endurance and underwater speed that no Allied destroyer could match. It could remain submerged for days. It could outrun a corvette underwater. It would have brought the Battle of the Atlantic back into balance if Germany could have built them in numbers. Spear hired a man named Otto Murka to organize Type 21 production.

[00:37:58]Murka was a truck builder. He was the general director of the Miraas worker firm in Olm, which made fire engines and trucks for the army. He had never built a submarine. He had never built any kind of ship. He had been hired specifically because he was a manufacturing man, not a naval architect. Spear had decided that the way to mass-produce yubot was to apply truck plant assembly methods to them. Murka decided that the type 21 would not be built the way any hubot had ever been built before. Instead of being constructed in a slipway from the keel up, the boat would be divided into eight pre-fabricated hull sections. Each section would be built at a separate inland steel factory. Roughly 32 different subcontractor steel firms would produce sections in parallel. The completed sections would then be railed and barged to three final assembly yards. Blow and Voss in Hamburg, Agazer in Bremen, and Shichaw in Danzig. There the sections would be welded together.

[00:38:57]Murka promised Spear the first boat would be delivered in April of 1944, and that production would ramp to 30 boats a month by autumn. The actual chief naval architect at the construction office, an engineer named Friedrich Schwer, objected. He wanted to build a single prototype boat first, work the bugs out of the design and only then go to series production. Schwer's request was overruled by Murker on schedule grounds.

[00:39:23]No prototype was ever built. The first type 21 went straight from the drafting room at the engineer Buero Glucenberg into series production at 32 factories Germany had never used for submarine construction before. The disaster when it came was almost mathematical. The historian Marcus O. Jones, writing in the Naval War College review in 2014, summarized what happened. The tolerances involved in submarine construction were and remain extremely exacting, Jones wrote. Type 21 hull sections were initially delivered to the shipyards with deviations of up to 3 cm in some cases and had to be torn apart and reconstructed properly with massive outlays of time and effort in the ways.

[00:40:10]Pressure testing revealed potentially lethal defects in the welding of the first boats, a result of poorly fitting components, new inspection standards, and construction methods unfamiliar to the facilities performing them. 3 cm, more than an inch of deviation on a pressure hull that had to hold against the weight of 200 m of seawater. The 32 inland steel firms had been building structural steel for buildings and bridges. They had never welded a submarine. They did not have the right inspection equipment. The pressure tests at Hamburg and Bremen and Danzig kept revealing weld defects. The Marines manganese saving order of April 1944, which had altered the formula of the high strength Sent 52 steel used for Yubot hulls, made the welds even more brittle. Hulls cracked under test.

[00:41:01]Sections had to be cut apart and rebuilt at the assembly yards. exactly the labor that Murker's modular system was supposed to eliminate. Clay Blair in his two volume history Hitler's Ubot war described the result in plain language.

[00:41:15]He wrote that the boat was hurriedly prefabricated in 32 factories and the eight major hull sections were crudely made and did not fit together properly.

[00:41:24]The reason they did not fit was that the inland steel firms had no central tolerance authority. There was no William Canudson at Spears Ministry walking into a factory and throwing out parts that failed the gauge. Each subcontractor decided for itself what was good enough. Of the 119 Type 21 Ubot commissioned by the end of the war, almost none were operationally ready.

[00:41:48]The United States Navy's official war damage report number 58, citing the Naval Technical Mission in Europe's Technical Report 312-45 from August of 1945, recorded that the boats were delivered by the final assembly yards, but none of them became operational due to hydraulic system defects. The diesel engines were fitted with superchargers that did not work. Designed horsepower of 2,000 fell to an actual 1,200. designed surface speed of 18 knots fell to an actual 15.6, which made the type 21 slower on the surface than a Royal Navy convoy escort. The hydraulic system that operated the diving planes, the rudders, and the torpedo tube doors was located outside the pressure hull where it was exposed to seawater corrosion, and worse, could not be reached for repair from inside the boat. Only one type 21 ever sailed an operational war patrol.

[00:42:44]Her name was U2511.

[00:42:46]Her captain was Corvettin Capitine Adelbert Schne. She left Bergen, Norway on the evening of the 30th of April, 1945, the afternoon Hitler shot himself in the bunker. On the 4th of May, Schne received Donuts's ceasefire order. By Schne's later account, he had obtained an attacking position on a British cruiser at 500 m, dived deep, and returned to Bergen on the 5th of May. He had not fired a torpedo. A second type 21 U 3008 under Capitine Litant Helmut Mansk sailed from Wilhelm's Haven on the 3rd of May 1945.

[00:43:23]She received the ceasefire signal while submerged near a convoy, made no attack, and surrendered at sea on the 11th of May. That was the operational career of the entire type 21 program. One patrol, zero torpedoes fired. A senior German naval engineer estimated after the war that each type 21 had consumed armaments grade steel equivalent to 30 German army tanks. Marcus Jones in his Naval War College review article concluded that the program had cost the German war effort some 5,000 tanks, 5,000 Panthers, 5,000 Panzer 4s at a moment when German army formations on both fronts had been reduced to skeleton strength. That is what happened when Germany tried to copy Kaiser. The Reich had no Springfield, no Hall at Harper's Ferry, no inheritance of the gauge tradition. It tried to leap to mass production without ever having mastered standardized parts, and the leap killed it. By the spring of 1945, with the Reich in its final weeks, German army repair depots across Western Europe were full of broken Panthers waiting for parts that would never arrive. The German Panza Commission's reliability census in January of that year had counted 500 defective Panza 4 final drives, 370 defective Panther final drives, and 100 Tiger failures, all waiting for replacement assemblies.

[00:44:49]The replacements never came. The factories that built them had been bombed or overrun or were producing at fractions of capacity because the steel and the alloys had run out. Across the front, Allied Ordinance Battalions were doing exactly what Campbell's general order in 1942 had instructed them to do, throwing the red tape out the window, putting tanks back in the fight. When the war in Europe ended on the 8th of May 1945, the United States had produced 49,234 Sherman tanks, almost 90,000 armored fighting vehicles of all types, more than 30,000 heavy bombers, 2,710 Liberty ships, and over 150 aircraft carriers of all classes. The country had transformed itself in 5 years from a depression scarred economy into the greatest industrial military complex in human history. After the war, William Kudson was asked how it had been done.

[00:45:47]His answer became one of the most candid summations any production man has offered. "We won," he said, "because we smothered the enemy in an avalanche of production, the like of which he had never seen nor dreamed possible." He was right about the avalanche, but the deeper truth was that the avalanche had been built on a foundation laid down 140 years earlier. Springfield and Harper's Ferry, John Hall's breach loading rifle of 1819, the American system of manufacturers shown at the Crystal Palace. Henry Ford's moving assembly line at Highland Park. Kudson confiscating hammers and files. KT Keller at Chrysler. Albert Khn designing the Detroit tank arsenal. Campbell throwing the red tape out the window.

[00:46:34]Madaris building 300 hedro cutters in 48 hours. That was the system. That was the inheritance. When a Veymarked mechanic in a captured ordinance depot in 1944 cracked open the engine deck of a knocked out American Sherman, lifted out the destroyed engine, and was handed a fresh one straight from a wooden Detroit crate. He saw something his entire industrial culture had never produced.

[00:46:59]He saw a part that did not need him. He did not need his caliper. He did not need his file. He did not need to spend 3 hours dressing the bell housing flange to make the new engine seat against the transmission. He just had to bolt it down. It dropped right in. The Panther, on paper, was the best tank of the Second World War. The Type 21, on paper, was the best submarine. Both were brilliant designs produced by brilliant engineers in a country that had given the world Daimler and Ben, Crup and Zeiss, Bosch and Maybach. None of it mattered. What mattered in the end was whether the part dropped in or had to be handfitted. America had been answering that question for almost 150 years.

[00:47:45]Germany never answered it at all. If you found this story worth your time, consider liking the video and subscribing for more. We have more to tell about the men of the Ordinance Battalions, more about the Panther program, more about the Type 21. We will see you on the next one. You have been watching WW2 Tales.