PANG is live! 3D Printing Designs!!

[00:00:00]How's it going, guys? So, I got some more designs down.

[00:00:05]I'mma run them through the slicer real quick. I already got some uh molds printing. So, pretty much show you a little quick rundown of how I do this.

[00:00:17]Won't be too in detail, but pretty much follow along. See how we do it.

[00:00:23]I think I could fit eight designs on uh on my 3D print when I print it. So, I'm g try to turn these sideways and I guess we'll go from there.

[00:00:38]So, eight designs. Let's see what we're going to do here.

[00:00:45]Guess we'll start off with uh Vegeta.

[00:00:51]How's it going, Parker?

[00:00:56]Let's run in some more uh 3D prints right here.

[00:01:04]Let's see.

[00:01:13]Got a lot of ideas uh I'm trying to capture here.

[00:01:23]I'm try to do some workout rounds.

[00:01:31]I'm getting used to this uh 3D printing.

[00:01:36]Keeping my rounds at 50.8 uh millimeters. That's the diameter staying around.

[00:01:46]And I'm trying to get it down to a 2 oz pour.

[00:01:54]How's it going, Humble?

[00:01:59]My first one here is Vegeta.

[00:02:07]One thing about this is when you see it coming off the edge, you got to adjust the size or the scale.

[00:02:18]Sometimes I don't check and then I print it. What? Uh, it pops out a lot.

[00:02:25]Always got to check the edges.

[00:02:33]It's crazy. I did print some rounds and you can actually see the sweat uh when you pour the silver.

[00:02:39]Got 45 lb weights here.

[00:02:44]I'm gonna try to hit up eight rounds.

[00:02:50]All right, our first one.

[00:02:57]Refresh this.

[00:03:02]I think this one's going to be a cool one. I'm do a You guys seen the World's Strongest Men?

[00:03:10]This one's Eddie Hole. Eddie hole.

[00:03:17]I know I'm swerving off a little bit from my pirate stockpile, but let me get get away from that watermark.

[00:03:31]What's up, Mustard? How's it going?

[00:03:33]How's it going?

[00:03:37]Confirm.

[00:03:43]You guys are neighbors.

[00:03:48]I didn't know you guys are neighbors.

[00:03:52]2 point. [panting and sighs] So, I'm think I'm trying to stick to I'm going do 50.8 diameter, 2.9 minimum, 4.9 max. Um I think this is probably going to get us pretty close to 2 ounces.

[00:04:11]That boy Eddie Hall, he's a beast.

[00:04:18]I wonder if I should make some bigger diameter rounds. I got to see on my flask.

[00:04:29]And I also think I could fit eight eight prints on my plate.

[00:04:36]I'm going try to stick them sideways.

[00:04:40]And we're going to go from there.

[00:04:43]Boy, the beast whole.

[00:04:54]Damn there.

[00:04:56]60 miles apart. Jeez, that is close.

[00:05:02]60 miles. By the time you go over there, the barbecue will be ready.

[00:05:11]I'mma do this. [sighs and gasps] I'm gonna try out a Buffalo round as well.

[00:05:23]50.8.

[00:05:31]You guys You guys could probably hear the 3D printer going off in the back.

[00:05:37]I got about eight rounds printing right now.

[00:05:42]Look at that buffalo.

[00:05:47]I think that one's going to come on.

[00:05:48]Nice.

[00:05:51]What's up, Serpent? How's it going?

[00:05:53]How's it going, Buffalo? Got the slot machine.

[00:06:00]Serpent, what do you know about that?

[00:06:02]What do you know about the slot machine, Serpent?

[00:06:09]I know down here uh in Texas, a lot of people don't think there's a casino in Texas, but they're wrong. They just don't know where to go.

[00:06:21]They just don't know where to go.

[00:06:26]All right, that's a looks like a nice one.

[00:06:31]Buffalo girl.

[00:06:35]So again, I'm aiming for eight designs here.

[00:06:42]Refresh.

[00:06:44]I'll check out this one. I think this one might be a good one right here.

[00:06:52]It's kind of like a uh nostalgia. I guess not too far back for the average person, but we know watermark.

[00:07:06]back in the day when we used to be some gamers.

[00:07:12]Decided to do a little gaming round, playing PlayStation.

[00:07:30]Man, I used to play PlayStation, I kid you not, like 18 hours a day.

[00:07:38]Geez.

[00:07:42]I actually made it on the list top four.

[00:07:45]I was top four in search and destroy.

[00:07:56]That was a world list, but it's probably because people moved on to other games.

[00:08:01]When I was up there, man. Oh, man.

[00:08:08]I think that's going to be a nice one.

[00:08:09]All right.

[00:08:13]Yeah, I used to be want I used to want to be a YouTuber even when I was younger. Of course, I'm not doing right now what I used what I wanted to do, but is what it is. All right, we'll try that out.

[00:08:34]Pretty hall.

[00:08:37]Look at this here.

[00:08:44]Grand Theft Auto PS2 was the best. Atari was the [ __ ] [laughter] This round right here reminds me of my dad.

[00:09:30]print that out.

[00:09:36]I think the edges maybe it might be all right at 99. Let's go back to 100.

[00:09:51]see what I'm seeing again. Yeah. So, Clint Pangwood, this right here was what I'm talking about. You see this little dip right here?

[00:10:17]So I I guess my last one when I poured I think when I pressed the sand it was like right I pressed it down to like right here the screwdriver. I think I left it too high to where it formed a a hole in his head.

[00:10:34]So I got to press it down just a little bit.

[00:10:39]I'm starting to learn a little bit.

[00:10:43]I am learning.

[00:10:47]All right, let's download this one.

[00:10:54]All right, that should be a good one. Let's refresh.

[00:11:02]Refresh the screen.

[00:11:06]That was one, two, three, four, five.

[00:11:11]What do we should do next? Guess we'll go up.

[00:11:23]Get this one in there. Number six.

[00:11:33]2.9 4.9 I'm going fill up my bucket. We're going to start pouring. I have a lot of stuff to pour.

[00:11:53]Some nice little mountains.

[00:11:57]Got the American flag, of course.

[00:12:01]Such a beauty.

[00:12:06]All right, let's go down.

[00:12:11]Probably 99.

[00:12:15]There we go. That's perfect.

[00:12:19]Should be a perfect round right there.

[00:12:26]We're down a little bit.

[00:12:31]One, two, three, four, five, six.

[00:12:42]Do another Vegeta round.

[00:12:54]I think so far with all the the prints I've been doing, man, I probably 3D printed over probably over 40 rounds already. Feel like it.

[00:13:18]It's a Vegeta round.

[00:13:23]I'm getting back into working out. So, let's do some workout rounds.

[00:13:31]Boy, it's curling two cars. Get out of here.

[00:13:36][sighs] Doesn't look like I have to adjust anything on the rim.

[00:13:41]Looks pretty nice. I think that one's going to come out fire.

[00:13:47]Download.

[00:13:55]How's it going, Blue?

[00:14:00]What's up, Savage?

[00:14:03]Are you making up words again?

[00:14:04][laughter] You can only curl one car. Jeez.

[00:14:14]All right, downloaded that.

[00:14:27]Do a range round as well.

[00:14:31]50.8. Eight.

[00:14:49]Like Dragon Ball Z. Yeah.

[00:14:56]Got a little bit shaving on the side.

[00:15:03]There we go. Nice.

[00:15:10]Focus. Safety. I don't know how the words are going to come out.

[00:15:15]Kind of inverted.

[00:15:20]Practice. Perform. Protect.

[00:15:23]Not too shabby.

[00:15:29]I should make a big round.

[00:15:31]I should make this into like a pretty big one.

[00:15:47]All right. So, that's one, two, four, five, six. I think I need one more.

[00:15:57]Two, three, four, five, six, seven. Oh, no. That was the eighth one.

[00:16:02]So that's eight rounds right there.

[00:16:16]Poor torso target. When I hit 1 million views, I'm actually going to pour a pretty nice round. Set it back at 100.

[00:16:28]I think I could probably set it at three, but I don't know how they feel about it to be honest with you. All right, so I did all these downloads.

[00:16:45]Downloads right there.

[00:17:11]Yeah, Spain won the World Cup. Nice.

[00:17:25]Oh, they scored.

[00:17:30]I haven't watched sports since 2009.

[00:17:34]Wait, that trophy is 18 karat gold.

[00:17:37]Jeez, that is nice.

[00:17:50]Hopefully you guys are adjusting your your guess up in the post that I did.

[00:17:56]I'll be dropping videos.

[00:18:00]That's going to be a pretty sick go away.

[00:18:13]Jerry, is he a soccer player?

[00:18:25]I'm quoting a game.

[00:18:32]You got to get all three all three correct.

[00:18:49][laughter] lady.

[00:18:58]Oh, I know what Jerry you're talking about now.

[00:19:06]Does he have the fastest though? No, I'm just kidding.

[00:19:16]That'll be fun to shoot with him.

[00:19:30]I like his work with the shotgun.

[00:19:34]That boy is fast.

[00:19:41]Oh, he came to temple. Nice. That's sick.

[00:19:52]Yeah, shotgun work is freaking sick.

[00:19:59]His daughter's world record shotgun shooter.

[00:20:04]He's kind of an [ __ ] >> [gasps] >> Yeah, a lot of them are be arrogant though. Yeah.

[00:20:25]Yeah. Is he married? [laughter] What's up, Avocado?

[00:20:30]How's it going?

[00:20:40]Looks like we got a little bit left.

[00:20:45]I'm about to get all this on the plate.

[00:20:50]Got to adjust my 3D printing.

[00:20:53]Threw some more duct tape on there.

[00:20:57]I'm at 30 30 some percent up in there.

[00:21:03]I got eight rounds going right now.

[00:21:18]I changed out my uh my little jar head.

[00:21:28]I just threw all the nonmelters in here.

[00:21:31]H I don't expect this to fill up fast.

[00:21:41]I threw all my pores in ammo can.

[00:21:44][clears throat] Nice.

[00:21:51]And I still got some stuff up there.

[00:21:54]Those are all nonmelters, too.

[00:21:58]There's those uh prospector rounds.

[00:22:02]Then I have like a random tube of this.

[00:22:04]Um I don't know. Still not sure. It's just sitting up there. Sitting up there waiting.

[00:22:17]Come on. Hopefully this thing is I'm going try to put this on a plate.

[00:22:26]send those your way.

[00:22:32]Sure, they might end up in a free giveaway once I get tired of looking at it and I get tired of not melting it.

[00:22:44]What's up, Wolf Track? How's it going?

[00:22:47]How's it going?

[00:22:50]This is the one uh note I keep out.

[00:22:55]actually got this from uh Oceans on his little auction he was doing.

[00:23:02]Triple sevens.

[00:23:05]Got my year on there.

[00:23:08]Wish it was on a star. No, that would be more sick.

[00:23:16]Still thing didn't transfer over yet.

[00:23:19]Probably should have did six rounds and then just added the one each individual.

[00:23:26]But I'm going to do eight rounds on this build plate. I'm going to turn them sideways. I think I'll be able to fit it sideways or diagonal cuz before I'm like doing six prints at a time, but I think I could stretch it to eight.

[00:23:48]Not all of the mermaids suck. You should give it this way.

[00:23:57]I got some fire watch on the I don't know if the this will be done while we're still on live.

[00:24:04]It's only at 40%. But I'll show you what I uh just printed. I got some sick stuff in there.

[00:24:12]Got eight of them.

[00:24:17]Eight pretty sick rounds.

[00:24:24]Serpent. I didn't I got a shipper package out still. You and STS. Yeah, the one to Scotland. I still got two packages to ship out.

[00:24:39]I'm going try it tomorrow sucks. like the post office.

[00:24:46]I think they close like at 6.

[00:24:50]Cool.

[00:24:52]Like all the stuff that I need. The post office, the banks, they all like I don't know. Like they don't feel like working.

[00:25:02]Either they don't feel like working or I'll be working too freaking much. One or the other. By the time I get off ain't nothing open. Lazy.

[00:25:13]Uh, it's funny.

[00:25:17]He's so funny.

[00:25:22]You guys ever work at a job and you try to get off early or you put in one day and leave and it's kind of like you slap them in the face.

[00:25:35]That' be funny.

[00:25:39]They're lazy, right?

[00:25:44]Well, I'm not sure if this is going to um take too long. Stuck at the same number.

[00:26:00]Come on.

[00:26:04]I just dropped a uh a gold video as well. How much gold is enough gold?

[00:26:12]I pretty much for my choice. It was one of the one of the posts I did.

[00:26:22]This was the results. If you haven't seen that yet, I did a post. How much gold is enough gold? Out of 122 people, this was the results percentage-wise.

[00:26:33]Gave out four options.

[00:26:36]5 years, 10 years, paid off house, 2 million plus.

[00:26:45]And for me, it's the paid off house. So, I'll give you I guess I'll give you the hint again since I already did in a video. So, if you guys did commented on my post and one of it is not paid off house, you're gonna lose. You're gonna lose. So, make sure you have paid off house in one of your options.

[00:27:20]21 years.

[00:27:23]All right, looks like we got it all onto the bill plate. It's going to be a slight lag and then I can start setting this up.

[00:27:38]Does does pain like parrots or horses?

[00:27:44]Parrots or horses?

[00:27:53]You talking about like in our current society? [laughter] Horses would be a lot of [ __ ] to clean up. [laughter] Just fishing from warheads.

[00:28:27]More like buffaloos.

[00:28:31]How many Rolexes do you own?

[00:28:34][sighs] Well, if you guys have been following on my videos, I pretty much like took off three answers there.

[00:28:43]So, I don't know how much is there seven options or six.

[00:28:49]I pretty much deleted three from the videos, the hints I gave.

[00:28:54]And then on top of that, I just told y'all right now that house should be one of the options. So that's four hints right there.

[00:29:11]But you got to be inside the live. I'll probably post it next week the day I'mma do it. But you got to be inside the live uh in the finale to win it cuz right from the beginning we're going to cut some heads. Jeez.

[00:29:31]Yeah, we gonna have we gonna have a good time.

[00:29:35]We gonna have a good time and it's going to be an awesome giveaway. I'm not going to tell you what it is right now, but It's almost like uh it's probably gonna be almost like doing a silver pickup.

[00:29:52]Tell you that there's only going to be one winner, too. So, all right. So, I got all my eight rounds are in this one round right here. So, what I'm going to do it, I'm going to stand it up.

[00:30:06]Just do four layers.

[00:30:11]All right. Let's see what we can do here.

[00:30:14]The thing about it is separating it.

[00:30:18]Hopefully I can still a little laggy.

[00:30:33]See, I had to upgrade a computer because my last computer I bought, I bought a cheap one and I couldn't even run the software. So, I had to upgrade to this.

[00:30:49]Tore between two.

[00:30:54]I'll probably give y'all maybe two more hits by the end of it.

[00:31:04]And then we'll do the when I do the live because we only got like two weeks, right?

[00:31:10]I'm actually going to Maine. So when I come back from Maine, I'll do the live.

[00:31:17]I'm doing one of my I did another video like enjoy life and stuff. So my goal within a one year is to hit four corners of the US. So, I already did San Diego, Florida.

[00:31:31]So, I'mma do Maine, and then I got to do a uh Alaska.

[00:31:39]I already did Washington, but I guess you could go up even further.

[00:31:48]All right. How are we going to separate this?

[00:31:54]Let me exit that.

[00:31:59]Exit that.

[00:32:04]Hopefully that'll give me a little more uh trying to be patient with this.

[00:32:28]The evening or the weekend?

[00:32:32]This evening. Evening or the weekend.

[00:32:42]Oh yeah.

[00:32:50]Now my brother-in-law went to Alaska. He did the whole fishing.

[00:33:02]I'm not sure which area to go to. I was just looking up the anchorage.

[00:33:14]Yeah, that's a lot of prints on here.

[00:33:18]I think once I get the first one off, it'll be faster if I can.

[00:33:26]I should have kept it at six and added other two. Let's see.

[00:33:31]Come on.

[00:33:37]Got gold painting there. Ship creek. Nice.

[00:33:55]Oh, there. I think I pulled one.

[00:34:01]Bring that over here. Right there.

[00:34:05]place on the build plate.

[00:34:08]Hopefully that was just one.

[00:34:12]Yeah, Eddie. Sheesh.

[00:34:17]Oh boy. Massive.

[00:34:19]So, the thing about this right here is the controls are kind of backwards. I don't know how to change it.

[00:34:38]Play some bill play.

[00:34:42]How's it going, Michael?

[00:34:47]Still busy with them rodeium bars.

[00:34:57]Play something.

[00:34:59]Man, I can't wait to pour this one.

[00:35:03]That one's going to be pretty fire.

[00:35:15]They make this so hard to navigate.

[00:35:33]Oh, I pulled a double.

[00:35:36]That's what it was.

[00:35:42][cough] [clears throat] Spain. one auto arrange.

[00:36:05]I don't think so.

[00:36:29]That's pretty much what I have to do to deal with this.

[00:36:39]All right, got one more and I'mma flip all these up. Start doing the supports.

[00:37:00]I was actually going to try to make a tutorial video of this one as well.

[00:37:11]I decided just to go live.

[00:37:14]All right. So, we actually got eight on here.

[00:37:21]Maybe I don't have to move at all.

[00:37:24]The thing is I don't want it to cut to start attaching to each other. I guess that's the issue.

[00:37:30]All right. So that's on the bill. We're going to rotate this.

[00:37:38]Let's go to about 80 degrees.

[00:37:55]Let's try. Nope.

[00:37:59]Nope.

[00:38:04]Oh yeah. Let's rotate these sideways.

[00:38:18]I think that should be okay.

[00:38:27]And then we'll move this up 30 millimeters.

[00:38:35]All right.

[00:38:38]Apply.

[00:38:42]Okay.

[00:38:44]That's pretty much we're going to do to all of them. Get a little height on them.

[00:38:53]Rotate 80°.

[00:38:58]Wonder if I could change the 90.

[00:39:05]Apply. All right. So, I'll do a 80 and a 90 here.

[00:39:11]And I move that to a 30. 80. 90. 30.

[00:39:16]80. 90. 30. Chase.

[00:39:22]I don't think they're touching.

[00:39:25]Watch when I put the supports. They're going to try to attach to each other.

[00:39:31]All right. So, we'll do a rotation.

[00:39:36]What do we say? 80 90.

[00:39:47]Apply.

[00:39:50]Move. 30.

[00:40:00]Jeez. Yeah.

[00:40:05]All right. Starting to move a little faster.

[00:40:14]Move it up. I wish we have all the options on the same screen.

[00:40:23]And that's our Buffalo girl. All right.

[00:40:30]Rotate on that one.

[00:40:36]Poor Boomerang.

[00:40:42]Probably a silver one back to 35.

[00:40:50]probably at that point I'll probably have to get me a the propane one.

[00:41:01]All right, got Vegeta.

[00:41:04]Jeez route.

[00:41:27]All right, that's six down.

[00:41:32]Two more to go.

[00:41:36]And with the supports, you can right click on the plate and it's there. Jeez.

[00:41:55]Are you using the uh the Bamboo Labs one?

[00:42:05]I'm using the ele 30. All right. About to head on to the supports.

[00:42:44]Okay.

[00:42:50]So, these are eight rounds we're going to add to our little bucket of randomness.

[00:43:01]All right. So support I don't have a option to apply all kind of thing. I got an option to delete all silver.

[00:43:17]Any pain when you make these are you able to estimate the weight?

[00:43:23]So, I'm currently going for two ounces right now. I'm getting pretty close. Um, I hit some at 21 and one nine. So, these are my next I'm pretty much pouring it, printing it, pouring it, and then adjusting it. And these ones right here, I already tried three times, I think.

[00:43:49]Three.

[00:43:52]So, I think I'mma be pretty close on this one right here.

[00:43:58]Not to like the I guess I'll try to be within instead of like 2.00 as le as long as I get like the 2.0 and then it could be like 2.01 02 or three like that.

[00:44:17]I'm trying to at least get the 2.0 an O down.

[00:44:21]And then that third number is probably going to be a random depending on uh how much designs in it.

[00:44:38]So I know you could do that for the muster. What's that 3D the 3D printer you have? collect the filament.

[00:44:53]So now you could do that with the volume with the the filament.

[00:45:08]Yeah, I have a resin printer. So a little bit different.

[00:45:24]This my this my 3D printer setup.

[00:45:32]Doing a couple rounds right now.

[00:45:49]51.

[00:45:56]So, it's kind of like upside down.

[00:45:59]Uh, I do have a camera in there, but kind of doesn't really work until you're at the end to towards the end when it lifts up. See how it supports in there? I tried with the clear one, but it's too flimsy there.

[00:46:29]got the whole wash station.

[00:46:34]So then I run it over here and then this is where I do my wash station and the curing station.

[00:46:44]Got a whole bunch of that space gray AK making a desktop dumbbell.

[00:47:04]A desktop dumbbell too.

[00:47:08]Fire bands 10 graph pretty well.

[00:47:19]I know for the filament um you could get it down.

[00:47:28]So, how are you doing it right now? Cuz I know you already started pouring, right?

[00:47:38]How does the resin print from the liquid? It's magic.

[00:47:45]There's like a little plate on the bottom and it's a tilt plate on the top. I'm not too sure though.

[00:47:55]All right. How much did that system cost?

[00:48:00]I got it on Amazon. It's called a Elgu Saturn uh 16K ultra 16K and then I got a wash station and a cure with it.

[00:48:19]So I got the printer right and then I was like okay so I'm I'mma send a print to the thing and then I was like shoot I need a computer. I didn't have a computer, so I had to buy this computer or I bought a computer and then from Best Buy, I set everything up and it wouldn't run this uh this satellite.

[00:48:42]So, I guess it wasn't I don't know if the graphics weren't strong. I just brought like the cheapest computer I could. So then I had to go back to Best Buy, turn it in, upgrade it for like a to this one, another couple hundred bucks.

[00:48:59]And this one was on sale, too. So I kind of went all in.

[00:49:13]So everything I I got so far, I'm probably pushing two grand.

[00:49:29]I have a copper virus set with one bar, two oz.

[00:49:38]How's it going, Nikki? Watching from work. Nice.

[00:49:44]Making that OT.

[00:49:55]I'm just making all these supports on here.

[00:50:00]Have a good day.

[00:50:04]It's hot today. Oh yeah.

[00:50:21]Yeah. So, how we're measuring it is from the diameter. I'm trying to keep the same diameter and then with the minimum thickness of the field to the max of the design.

[00:50:35]And I'm just estimating it off there.

[00:50:48]Little elves. [laughter] Parker, where's the elves at?

[00:50:53]Are they friendly or not friendly?

[00:51:07]Joseph Bamboo Studio will give you volume. There you go. Mustard got it.

[00:51:16]Yeah, because I know, man. Uh FG got the thing down already cuz he he did some rounds for me at at uh 1 ounce and that was like he was like pretty super spot on cuz as I'm cleaning them he's like make sure you wait as you're cleaning it cuz you're going to be under. So, I was pretty close.

[00:51:48]I'm all in with the Thundercats coin.

[00:51:56]Oh, yeah. Like the Thundercast.

[00:52:11]Yeah, I know there's a couple people that use this style, the resin, but I don't think they made videos on how to use it, how to adjust it.

[00:52:22]I want to know the secrets.

[00:52:29]The more I know, I'm just going to make a video.

[00:52:32]Everybody gonna know. I know. You know, every time I search up like how to 3D print a mold to bore silver, it's always like nothing really comes up for the resin. It's always like something else. They're making like a helmet or something.

[00:53:08]Now this the process we're already at 53 minutes.

[00:53:15]So I think I just did a live. So that process was How long was that?

[00:53:21]Like almost two hours probably.

[00:53:25]This one's already at an hour.

[00:53:31]That's not including the print time on this is probably going to be like two and a half hours. So two, two hours, four and then depending on how long you take to design it, right? All in on one round could be like six hours, two, four. Yeah.

[00:53:58]Jeez.

[00:54:01]Later, Nikki. Get some OT.

[00:54:07]Tell him not to deduct you for taking lunch.

[00:54:16]You hear your printer have me thinking my truck was making funny noises.

[00:54:20][laughter] So, man, you can see these two rounds. I made it sideways so it could fit. But the two rounds right here, they're connecting. [music] The supports are connecting. So, this one didn't do it, but this one did.

[00:54:41]And you can see that little tiny, it made one support right there.

[00:54:47]Jeez.

[00:54:49]I could probably manual edit that one though.

[00:54:53]I just don't want it to be like all the way up to the top like jeez.

[00:55:01]Got to teach AI some common sense, huh?

[00:55:08]What's up, KK?

[00:55:14]KK, can you teach AI some common sense?

[00:55:17]thought that knowledge you got.

[00:55:21]Just start putting all your knowledge into AI so they can remember it.

[00:55:34]Generate the support.

[00:55:49]So, I know some people that got some jobs that do AI, like work from home and do all that stuff. And let me tell you, them boys and girls is making money.

[00:56:05]Making money.

[00:56:20]says teach southeast AI can't grade yet. So I got these random people. They're like the coin apps almost like the pocket pinger app but it's another coin app that you know you put the coin on or you put your phone on the coin and it shows you like all right this is uh limited mintage of this and that. So, I had some people are reaching out to me uh so I could put their their app on my channel and they're like telling me uh I'll pay we watch your YouTube uh we think that your channel be perfect uh as a coin collector and I was like bro you must be not be watching my channel.

[00:57:10]Like once I once I read that part, I was like, "These guys do not watch my channel."

[00:57:16][ __ ] How you going? Sketchy.

[00:57:30]I wish this was a little faster, but I can't wait to pour that this round down here in the bottom.

[00:57:47]Whole TV up in there. Little helicopter.

[00:57:52]Pretty good one.

[00:58:03]Jeez, long process.

[00:58:09]And master, I see all your uh your 3D printing for your poker chip stands.

[00:58:17]Going to pretty fire on those prints.

[00:58:20]Pretty pretty fire.

[00:58:25]Got some privies on there. Jeez.

[00:58:35]He did a lot of pores yesterday.

[00:58:43]Yesterday I only did two pores yesterday.

[00:58:55]Got two pores in my life.

[00:59:07]Critical angle 50. I'm not messing with any of the supports here. I'm just doing automatic as long as there's not a lot on the face of it like right here. one time. So, I had it at These are at 80 degrees.

[00:59:31]Oh, I hate that when it goes to the back like that. I hate it.

[00:59:36]But these are at 80.

[00:59:38]When I had it at straight 90, all this right here, these supports were in the front and it's messing it up because there's like a lot of these little dimples.

[00:59:53]So if it prints out with too many might mess up the front.

[01:00:00]I don't even know why it has supports when I'm leaning it backwards.

[01:00:05][sighs and gasps] So irritating.

[01:00:12]So that what you saw there in the back of this round how it's like a whole line across. Pretty much when I take that out of the wash station, I'mma have to uh grind that down a little bit to make it flat and I throw back in a wash station. If not, it'll be like little dimples when it harden.

[01:00:40]What's up, Practice makes perfect.

[01:01:03]The thing about pouring silver is like I feel like it's such a long process and you don't know if you'll mess up all the way until the end. That's That's the sucky part.

[01:01:18]It's not like it's like 10 minutes in and you can fix something and you try to do it. It's like you're not guaranteed it's going to work till you pour the whole thing and then you're like, jeez.

[01:01:31]>> Major fail.

[01:01:38]What do you guys think about these prospectors?

[01:01:41]think they're worth keeping or not?

[01:01:43]I'm going to show you guys these prospector rounds.

[01:02:01]I got five of these.

[01:02:14]I think these are worth keeping or no?

[01:02:18]Melt it. Melt it.

[01:02:30]I don't care for them. They look nice.

[01:02:34]So, we got one So, we got two nice and three melt. I want to keep them.

[01:02:48]Kept these to the side. Part of my non-melters.

[01:02:52]This actually, this whole thing right here is everything I'm saving.

[01:03:01]Got a lot of buffaloos in there. some buffalo design. I would do keep two, milk three. It look nice.

[01:03:14]Yeah, that's what I was thinking. I was going to throw it up in my auction in January.

[01:03:20]Have some random stuff just so I could uh buck and go. Start off at a dollar.

[01:03:27]So, I do some pores and then in between every pour, I'll probably do a buck and go. I mean, that's what my plan is, and that's why I got these, too. So, I got these uh silver eagles.

[01:03:42]I mean, they they look nice.

[01:03:45]They're not uh all messed up. And they got that 130 anniversary year.

[01:03:54]They look all pretty nice. Nice and shiny.

[01:03:58]So, I'll start these off at a dollar.

[01:04:04]Whoever shows up.

[01:04:10]All right, one more. [sighs] I was going to keep more of the gram stuff to start small, but I put it all in like my giveaway stuff.

[01:04:27]Just give it away.

[01:04:34]like the one that Yeah, that's a nice one. I did short on that.

[01:04:42]I was like, is this real or fake?

[01:04:45][snorts] That was real. 30 year anniversary.

[01:04:55]Almost done, guys.

[01:04:58]this process, lengthy process.

[01:05:06]What are you guys all eating for dinner today? What's fed dinner?

[01:05:13]You would keep any fractional.

[01:05:20]Yeah, not fractional. Fractional gold.

[01:05:29]>> [snorts] >> for my fractional silver. I pretty much got 90%.

[01:05:34]114. All right, let me see how much.

[01:05:37]Oh, man.

[01:05:40]So, there's only this one.

[01:05:45]Oh, look at all that under there. So irritating.

[01:05:52]So, that was a double.

[01:05:55]This one's a double backer as well.

[01:05:58]I don't know if you can see that.

[01:06:04]So down here, it looks like a double.

[01:06:12]Oh, I think it's a triple. One, two, three lines straight in the back. Shees, it's going to be irritating.

[01:06:23]Uh, this one's a double as well.

[01:06:30]All right, let me try to do a manual edit if I can.

[01:06:36]I don't know if I will be able to.

[01:06:43]That my brain is irritating.

[01:06:51]Edit anchor.

[01:06:54]Select support.

[01:06:58]I don't think I could take it off individually.

[01:07:07]How's it going, Teresa?

[01:07:15]What's pain melting now? everything.

[01:07:19]Double cheeseburger.

[01:07:23]She's ground beef with green beans, onion, garlic, patice, fish sauce, sour, soy sauce or cheese.

[01:07:40]Just got muscle.

[01:07:44]Nice pickup, man. not making me hungry.

[01:07:49]I don't think I could. It's not letting me click a support area.

[01:07:55]You know what I'm going to do? We just going to run it.

[01:08:00]It's right here in the front, too.

[01:08:02]Holy canoli.

[01:08:06]See those front supports?

[01:08:14]So irritating.

[01:08:20]All right, cancel.

[01:08:23]Let me try one more time.

[01:08:26]Move trees support.

[01:08:32]Maybe that'll work. Let me see.

[01:08:36]I pretty much want to delete this whole back rows.

[01:08:51]edit.

[01:08:56]So, it gives me the option to delete all of it, but not one by one.

[01:09:08]Then we're just going to save it like this and it'll just uh grind it off once we print it.

[01:09:17]Probably be the best bet.

[01:09:21][sighs] Yep. Slice it.

[01:09:27]Filipino dish. Yeah. With that batis.

[01:09:31][gasps] You watch yourself some joky. [laughter] That's funny.

[01:09:39]All right, let's slice it. Going to preview mode.

[01:09:53]If I can cancel edit, what are you eating, Catcom?

[01:10:11]What's Catcom eating for dinner?

[01:10:20]I think I'm eating some baked chicken.

[01:10:22]Baked chicken.

[01:10:31]Later it let it.

[01:10:37]Yeah. So, I'm pushing it to eight and it's super slow at eight.

[01:10:44]But I think next time I'll hit up six and then I'll just add the other two. I think it'll probably be faster.

[01:10:50]All right.

[01:11:03]Okay.

[01:11:09]Select.

[01:11:19]Come on. I'm trying to get back to the main page.

[01:11:29]My printer's at 66.

[01:11:32]So, yeah, that's pretty much my process of uh before I 3D print 3D print it. I do all this stuff right here. I'll probably go through another live with you guys of how I actually get the designs and stuff.

[01:11:51]pretty much just uh tell AI what to do without getting uh like breaking the rules and stuff. I always have some rule stuff pop up like there certain stuff it can't create.

[01:12:08]That's irritating right there.

[01:12:16]I'm trying to get to the slice.

[01:12:28]So [snorts] I did restore to previous state. Oh, trying to get back to start detection support area.

[01:12:41]Jeez.

[01:12:45]I feel like I'mma delete everything if I press the wrong button. Just kind of sketchy. [gasps] Restore P. I don't know what that means.

[01:12:56]I just did an update on this. That's why. So, I'm not sure what it updated, but I hate when they try to update stuff that's not broken.

[01:13:09]All right, I'mma go for restore to the restore the previous state.

[01:13:14]See, I don't know what that is.

[01:13:17]Go back.

[01:13:27]Didn't do nothing.

[01:13:41]Press F.

[01:13:47][sighs] Oh, I'm stuck on this page, guys.

[01:14:04]It's running slow. Try not to be impatient.

[01:14:11]Oh, there. There a little bit of movement.

[01:14:19]Oh, no. It took a support away. Go back.

[01:14:23]See, now it's going to mess something up.

[01:14:34]So that's what the back button does.

[01:14:38]Uh, this is in delete everything.

[01:14:42]I got to wait for this to go back to normal.

[01:14:50]I'll probably do some pouring on it.

[01:14:59]probably like Wednesday, Thursday. Maybe Wednesday, Thursday, I'll come back on live, do a pour pour session. It's going to be uh my next pour.

[01:15:10]It's going to be a mustard and biscuits.

[01:15:13]Do a little collab pour with mustard and biscuits. So stay tuned in for that round. That'll be a pretty sick round if it comes out right.

[01:15:27]So, I'mma try I'll probably try two attempts uh two rounds.

[01:15:35]I think it's going to be pretty nice.

[01:15:42]All right, and I'm going to end it live here. I'll try to figure out keep messing with this so I can end up slicing it.

[01:15:52]Thanks everybody for tuning in.

[01:15:57]Hopefully everybody has an awesome week.

[01:15:58]I'll do a short video tomorrow morning.

[01:16:01]Going over that Monday to Monday update on the silver and gold prices.

[01:16:06]Silver has dropped uh just a little bit.

[01:16:09]But you guys know next week's payday, so I'm expecting it to go back to like 60, but we'll see. We will see.

[01:16:20]All right. [sighs] Later. Later. Thanks for tuning in, guys.